K-Tech Suspension Limited
Items 351 - 378 of 378
In stock
Self-locking nut for Showa piston rods (M12x1.25)
Nut for SHOWA piston rods (M16x1.25) Design: flat (6.90mm) Original SHOWA spare part Not self-locking
In stock
O-ring fork foot CRF/KXF/RMZ - SFF AIR
In stock
O-ring pressure stage cover CRF/KXF/RMZ - SFF AIR
In stock
O-RING FOR K-TECH FORK KIT (SPRING PRE-TENSION SEAL) Scope of delivery: 1 Pc
TOOL FOR OPENING ÖHLINS FORKS No. of pins: 8 pieces Bolt circle diameter: 42 mm Pin diameter: 2.50 mm
In stock
For quick and precise adjustment of the oil level or air chamber
In stock
Face wrench for fork covers: - WP 4CS - WP Open Cartridge Bolt circle diameter: 39 mm
In stock
Self-locking nut M6x1.0 (flat)
In stock
Self-locking nut M8x1.00HN
In stock
For Honda CRF250/450 - 2008
In stock
For removing the KYB/SHOWA shock absorber compression stage adjuster (21 mm).
In stock
Universal tool for filling shock absorbers with Schrader valve and rubber plugs (needle filling)
In stock
 ,
Also suitable for K-TECH Bladder-Kit 211-900-110 and Bladder-Kit 211-900-125
Also suitable for K-TECH Bladder-Kit 211-900-115 , 211-900-130
TUNING SPRING HOLDER / HYDROSTOP KYB 48MM (HOLES)/BOLTED WITHOUT BOLTS K-Tech spring holders improve resistance to fork bottoming out. Improved hydrostop thanks to smaller oil holes in the spring holder!
In stock
TUNING SPRING HOLDER / HYDROSTOP KYB 48MM
(SLOTS) / SLOTTED
WITHOUT BUSHINGS
K-Tech spring retainers improve resistance to fork bottoming.
In stock
TUNING SPRING HOLDER / HYDROSTOP KYB 48MM 2018-> (HOLES) / HOLED WITHOUT HOLES K-Tech spring holders improve resistance to fork bottoming out. Improved hydrostop thanks to smaller oil holes in the spring holder!
In stock
TUNING SPRING HOLDERS / HYDROSTOP KYB 48MM 2018-> (SLOTS) / SLOTTED WITHOUT LUBRICANTS K-Tech spring holders improve resistance to fork bottoming.
In stock
TUNING SPRING RETAINER / HYDROSTOP SHOWA 47MM WITHOUT BUSHINGS
In stock
TUNING SPRING RETAINER / HYDROSTOP SHOWA 49MM WITHOUT BUSHINGS
In stock
TUNING SPRING HOLDER / HYDROSTOP KYB 48MM (HOLES)/BOLTED WITHOUT BOLTS K-Tech spring holders improve resistance to fork bottoming out. Improved hydrostop thanks to smaller oil holes in the spring holder!
In stock
Tool for dismantling the spring preload unit for K-TECH fork spring kits
In stock
Tool for changing the fork springs of the SHOWA BIG PISTON FORK
In stock
4-piece tool set for removing and fitting fork springs.
Items 351 - 378 of 378