K-Tech Suspension Limited
This K-Tech shock absorber tool is designed for removing and installing the K-Tech KYB RCU compression adjuster
This tool fits:
Fits all 48 KYB forks!
Stop buffers for shock absorbers
Size:
34 mm x 14 mm x 20 mm (D x W x H)
Stop buffers for shock absorbers
Size:
34 mm x 14 mm x 40 mm (D x W x H)
NEW:
Softer balance springs -> allowing for lower air pressure in the PSF fork while maintaining the same travel (e.g., for lighter riders).
1 set (2 pieces)
Piston Rod Seal / Cartridge for SHOWA 49
K-Tech's RVS piston kits are designed to help suspension technicians enhance the performance of OEM products. All parts are engineered to the same standards as all other K-Tech products, drawing on more than fifteen years of competition experience to deliver high-performance tuning parts.
- Improved Comfort
- Improved control
- Tighter tolerances than OEM
- Low friction
- More stable and consistent damping
The K-Tech "Pro Valve" replaces the OEM valve with pre-assembled shim stacks to deliver superior damping characteristics that optimize ride quality, improve stability, and provide responsive feedback across a variety of terrains. This makes it the ideal choice for off-road riders who want to push their limits with greater control and comfort.
- Increased traction
- Improved compliance over bumps
- Improved control
- Low friction
- Lower stiffness
- More stable and consistent damping
It is recommended that this product be installed by a professional suspension manufacturer, as special tools and skills are required to ensure the safety and performance of the product
For removing the nitrogen reservoir cap on shock absorbers.
Suitable for the following shock absorbers (M4 thread):
- BUD
- C2P
- ÖHLINS
- K-TECH shock absorbers
12.5 x 24 x 5 mm
SHOWA
12.5 x 28 x 5 mm
KYB
14 x 24.4 x 3.4 mm
SACHS
14 x 26.9 x 4.9 mm
KYB/SHOWA/WP
One-piece (no support ring required)
14 x 30 x 5 mm
KYB
16 x 24.5 x 3 mm
SACHS
16 x 26 x 5 mm
ÖHLINS
16 x 28 x 5 mm
KYB
16 x 28 x 5 mm
SHOWA
16 x 37 x 5 mm
KYB
18 x 26.5 x 3.4 mm
SACHS
18 x 30 x 5 mm
SHOWA/KYB/WP
14 x 24 x 5 mm
Fits, among others:
SHOWA 49 Fork (Cartridge Seal)
SOQI shock absorber (seal head)
K-Tech tools for front forks and shock absorbers are designed to help suspension technicians improve efficiency in their workshops. All tools have been developed based on over twenty years of experience in the suspension industry to enable users to work effectively and safely.
This transparent adapter is designed for use with the K-Tech vacuum machine to visually verify that air has been removed from the system.
FF PRO VALVE WP 35mm SX65 2026-
Fits all 48mm KYB forks!
K-Tech’s latest Sapphire Coated Inner Tubes for WP 48mm front forks. Designed with cutting-edge materials and technology, these premium inner tubes not only deliver a stunning “factory” look but also enhance performance
- Precision-engineered from hardened steel, these inner tubes offer exceptional durability and impact resistance
- Advanced sapphire coating reduces friction within the forks, resulting in smoother operation
- Sapphire-coated inner tubes give your WP forks a professional "factory" look.
The K-Tech Off-Road Fork Work Station was designed for precision, organization, and efficiency, and is the ultimate service companion for suspension specialists and dedicated motorcycle enthusiasts. Designed to securely hold multiple fork components during disassembly and maintenance, this purpose-built work station keeps your workspace organized while allowing oil to drain safely from critical suspension parts.
The workstation was specifically designed for off-road forks to support inner and outer fork tubes, cartridges, shock rods, and shock assemblies during maintenance. Each component can be securely placed in its designated holders while excess fork oil drains away, preventing mess and improving workflow efficiency. Since all parts are stored upright and organized in a single compact station, technicians gain more usable workspace and better visibility, which helps streamline complex suspension maintenance tasks.
-
Key Benefits
- Secure Storage of Components—Safely stores fork tubes, cartridges, piston rods, and damping assemblies during maintenance.
- Better Organization in the Workshop—Keeps suspension parts organized and easily accessible.
- Oil Drain Management—Allows fork components to drain naturally while being held in place.
- Space-saving design—Saves valuable bench space during suspension overhauls.
- Precision tool for the workshop—Ideal for suspension technicians, racing teams, and ambitious mechanics.
Dimensions: 40x52.5x4.6/14 mm
YAMAHA TENERE FORK CLAMP TOOL CARTRIDGE
WP 35
Dimensions: 35.00 x 46.00 x 11.00 mm
Sales unit: 1 SET (2 PIECES)
WP 35
Dimensions: 35.00 x 46.00 x 8.00/11.00 mm
Sales unit: 1 SET (2 PIECES)
Manufacturer: Ariette
SHOWA 35
Dimensions: 35.00 x 48.00 x 11.00 mm
Sales unit: 1 SET (2 PIECES)
KYB 36
Dimensions: 36.00 x 48.00 x 8.00/9.50 mm
Sales unit: 1 SET (2 PIECES)
Manufacturer: Ariette
SHOWA 37
Dimensions: 37.00 x 50.00 x 11.00 mm
Sales unit: 1 SET (2 PIECES)
Part No.: AR8893G
SHOWA 39
Dimensions: 39.00 x 52.00 x 11.00 mm
Sales unit: 1 SET (2 PIECES)
Part No.: BR2722E
Dimensions: 40.00 x 49.50 x 7.00/9.50 mm
Sales unit: 1 SET (2 PIECES)
KYB 41
Dimensions: 41.00 x 53.00 x 8.00/10.50 mm
Sales unit: 1 SET (2 PIECES)
Part No.: BR3976I
SHOWA 41
Dimensions: 41.00 x 54.00 x 11.00 mm
Sales unit: 1 SET (2 PIECES)
NOK No.: BR2003I
WP 43
Dimensions: 43.00 x 52.70 x 9.50/10.50 mm
Sales unit: 1 SET (2 PIECES)
Part No.: BR6843E
SHOWA 43
Dimensions: 43.00 x 54.00 x 11.00 mm
Sales unit: 1 SET (2 PIECES)
