K-TECH
Items 251 - 297 of 297
In stock
Dimensions: 33x7.00x0.98
In stock
Dimensions: 40x8.00x1.25
In stock
Dimensions: 44x8.00x1.20
In stock
Dimensions: 50x10.00x1.25
In stock
Tool for pulling out and holding the fork piston rod -> for bleeding the fork -> for pulling out the piston rod to fit the screw connection Thread sizes: M13 x 1.0
In stock
LOWER FRICTION THAN OEM. dimensions: 40x11.50x1.2
In stock
LOWER RIBBING THAN OEM. dimensions: 46x11.50x1.20
In stock
LOWER FRICTION THAN OEM. dimensions: 50x11.5x1.25
In stock
LOWER RIBBING THAN OEM. dimensions: 46x8.00x1.50
In stock
LOWER RIBBING THAN OEM. dimensions: 46x12.10x1.20
In stock
LOWER FRICTION THAN OEM. dimensions: 40x8.00x1.25
In stock
LOWER FRICTION THAN OEM. dimensions: 50x13.5x1.2
In stock
LOWER FRICTION THAN OEM. dimensions: 46x10.00x1.25
In stock
LOWER FRICTION THAN OEM. dimensions: 46x13.00x1.25
In stock
LOWER RIBBING THAN OEM. dimensions: 46x8.00x1.00
In stock
LOWER FRICTION THAN OEM. dimensions: 50x10x1.25
In stock
LOWER FRICTION THAN OEM. dimensions: 50x13x1
In stock
LOWER FRICTION THAN OEM. dimensions: 50x13x1.25
In stock
LOWER RIBBING THAN OEM. dimensions: 36x8.00x1.00
In stock
LOWER FRICTION THAN OEM. dimensions: 50x8x1.2mm 1 set (2 pieces)
In stock
LOWER FRICTION THAN OEM. dimensions: 50x8x1 1 set (2 pieces) WP-PDS
In stock
Assembly tool for tightening the K-TECH bladder kit Diameter : 74 MM
In stock
Assembly tool for tightening the K-TECH bladder kit Diameter : 56MM
In stock
O-ring fork foot CRF/KXF/RMZ - SFF AIR
In stock
O-ring pressure stage cover CRF/KXF/RMZ - SFF AIR
In stock
O-RING FOR K-TECH FORK KIT (SPRING PRE-TENSION SEAL) Scope of delivery: 1 Pc
TOOL FOR OPENING ÖHLINS FORKS No. of pins: 8 pieces Bolt circle diameter: 42 mm Pin diameter: 2.50 mm
In stock
For quick and precise adjustment of the oil level or air chamber
In stock
INSIDE COATING Nominal dimensions: 46 x 12 x 1.0 mm (inside Ø x height x wall thickness) SUITABLE FOR FORK TYPE: KYB 46
In stock
For Honda CRF250/450 - 2008
In stock
For removing the KYB/SHOWA shock absorber compression stage adjuster (21 mm).
In stock
Universal tool for filling shock absorbers with Schrader valve and rubber plugs (needle filling)
In stock
TUNING SPRING HOLDER / HYDROSTOP KYB 48MM (HOLES)/BOLTED WITHOUT BOLTS K-Tech spring holders improve resistance to fork bottoming out. Improved hydrostop thanks to smaller oil holes in the spring holder!
In stock
TUNING SPRING HOLDERS / HYDROSTOP KYB 48MM (SLOTS) / SLOTTED WITHOUT BACKING K-Tech spring holders improve resistance to fork bottoming.
In stock
TUNING SPRING HOLDER / HYDROSTOP KYB 48MM 2018-> (HOLES) / HOLED WITHOUT BOLTS K-Tech spring holders improve resistance to fork bottoming out. Improved hydrostop thanks to smaller oil holes in the spring holder!
In stock
TUNING SPRING HOLDERS / HYDROSTOP KYB 48MM 2018-> (SLOTS) / SLOTTED WITHOUT LUBRICANTS K-Tech spring holders improve resistance to fork bottoming.
In stock
TUNING SPRING RETAINER / HYDROSTOP SHOWA 47MM WITHOUT BUSHINGS
In stock
TUNING SPRING RETAINER / HYDROSTOP SHOWA 49MM WITHOUT BUSHINGS
In stock
TUNING SPRING HOLDER / HYDROSTOP KYB 48MM (HOLES)/BOLTED WITHOUT BOLTS K-Tech spring holders improve resistance to fork bottoming out. Improved hydrostop thanks to smaller oil holes in the spring holder!
In stock
Tool for dismantling the spring preload unit for K-TECH fork spring kits
In stock
Tool for changing the fork springs of the SHOWA BIG PISTON FORK
In stock
4-piece tool set for removing and fitting fork springs.
Items 251 - 297 of 297