TOOLS ENGINE/CHASSIS
Items 1 - 43 of 43
In stock
Capacity: 3 liters
In stock
Capacity: 3 liters
Top
HOLDER FOR T-KEYS 10 SLOTS FOR T-KEYS
In stock
The bottom bracket puller set contains the following adapters for use with a wide range of diameters without having to preload the expanding sleeve.
- Adapter 8-11mm
- Adapter 10-13mm
- Adapter 12-15mm
- Adapter 15-17mm
- Adapter 17-20mm
- Adapter 20-24mm
- Adapter 25-29mm
The tool can be used with the supplied supports (adjustment range 22-80mm) or a swing hammer.
In stock
Serrated clamping jaws Special tool steel
In stock
New
- Scope of delivery: 1 piece - Length: 400 mm
New
- Scope of delivery: 1 piece - Length: 400 mm
The S-TECH mud scraper is your quick little helper for removing mud/dirt, e.g. between your training sessions or races. Each mud scraper comes with an ergonomic S-TECH rubber grip and is available in the colors - black/red - red/red - black/orange
T-WRENCH SET
8-10-12-14-17mm
In stock
In stock
Universal adapter with three wrench sizes for the chassis workshop. The 22 mm side has a hole and is therefore suitable, for example, as an adapter insert for opening the SHOWA SFF-AIR fork of the CRF 250 (screw connection with valve). wrench sizes: 19 mm 22 mm 24 mm
In stock
Tool set for removing O-rings and other seals
In stock
Rubber stoppers for needle filling. 100 mm pieces are supplied. This results in approx. 20 rubber stoppers. Diameter: D= 5.70 mm
In stock
In stock
2-in-1 air pump for bikes and tires (Schrader valve):
1. Precise adjustment of the air pressure for air-sprung forks and shock absorbers using a small stroke and high-quality measuring sensor and digital display
2. Inflation of tires or air forks (with Schrader valve) by means of an unlockable second cylinder with large stroke volume
In stock
FOR REPAIRING DENTS IN EXHAUST BULBS --FITS ALMOST ALL MX AND ENDURO EXHAUST BULBS--
In stock
SAFETY LOCK FOR THE BRAKE LEVER. ENSURES A SAFE STANDING OF THE MOTORCYCLE e.g.: DURING TRANSPORT IN THE WORKSHOP OR ON A WHEEL UNDER A UNIVERSAL OUTLET - SUITABLE FOR ALL BRAKE LEVELS.
Serrated clamping jaws Special tool steel
In stock
GAUGE FOR QUICK AND EASY ADJUSTMENT OF THE SAG! MEASUREMENT POSSIBLE ON THE REAR WHEEL AND ON THE FORK ZERO POINT ADJUSTABLE, THEREFORE NO MORE CALCULATIONS NECESSARY. THE MEASURED VALUE IS DISPLAYED DIRECTLY FOLDABLE. THEREFORE SMALL TRANSPORT DIMENSIONS FOR MINI AND LARGE BIKES
In stock
In stock
Internal puller from 30-68mm
In stock
In stock
S-TECH CHAIN CUTTER Ideal for cutting O-ring, X-ring and standard chains Suitable for the following chains: 420, 428, 428H, 520, 520H, 525, 525H, 530, 530H, 630, 630H
Indispensable helper when fitting tires with mousse!
In stock
TOOL FOR ADJUSTING THE OIL LEVEL ON FORKS - 200 ML LARGE VOLUME ->> ADJUST OIL LEVEL IN JUST ONE OPERATION, EVEN WITH LARGE VOLUME FORKS - SUCTION HEIGHT ADJUSTABLE QUICKLY AND EASILY BY MEANS OF SCALING AND ADJUSTABLE SLIDER
In stock
OIL DRAIN HELP KTM/HUSQVARNA connection hose with adapter for connection directly to the oil drain opening KTM 125/250/300 XC/EXC/XCW//SX 2017-2023 HUSQVARNA 125/250/300 TC/TE/TX 2017-2023 GASGAS EC/MC 125-300 2021-2023
In stock
FOR KTM/ HUSQVARNA KTM 250CC -> 2016 HUSQVARNA -> 2014 -2016 HUSABERG -> TE 2011 - 2014
In stock
S-TECH tire irons : Extremely robust, long and ergonomically shaped tire irons. Also ideal for mounting mousse - Scope of delivery: 1 piece - Length: 380 mm - Extremely robust
In stock
- Scope of delivery: 1 piece - Length: 400 mm
In stock
In stock
SAFETY WIRE FOR HANDLES. PREVENTS THE HANDLES FROM SLIPPING OFF THE HANDLEBAR. WIRE THICKNESS: 0.7 mm WIRE LENGTH: 30 meters
In stock
- 40mm wide straps
- approx. 2m max. strap length
- with handlebar protection loop
In stock
S-TECH T-WRENCH WITH 3x 1/4 INCH NUTS - FOR PICKING UP 3 NUTS AT THE SAME TIME - THE SUPPLIED SET INCLUDES 6/8/10MM NUTS
In stock
VALVE EXTRACTOR
In stock
4 KEYS WITH THE FOLLOWING KEY WIDTHS: KEY 1: 5.6mm, 5.7mm, 6.0mm, 6.3mm, 6.6mm, 6.8mm KEY 2: 5.0mm, 5.4mm, 5.8mm, 6.2mm, 6.4mm, 7.0mm KEY 3: 5.1mm, 5.5mm, 6.1mm, 6.5mm, 6.7mm, 6.9mm KEY 4: 4.0mm, 7.1mm, 7.4mm, 5.6mm, 6.0mm, 6.2mm
In stock
DIAL GAUGE HOLEX ! SUITABLE FOR ALL VHM MEASURING TOOLS !
TOOL FOR : 125-150CC ENGINES
In stock
TOOL FOR : 250 CC ENGINES
TOOL FOR : 300 CC ENGINES
Maximum bore diameter 91mm
In stock
TOOL FOR : 65-85CC ENGINES
In stock
#NAME?
Items 1 - 43 of 43