K-TECH
Items 51 - 100 of 297
UPGRADE KIT FOR ALL ZF/SACHS 48 FORKS Better tolerances to improve damping performance Improved adjustment range Completely pre-assembled units make installation easier Improved damping comfort and increased driving stability
In stock
TOOL FOR DISMANTLING K-TECH KITS IDS/RDS/DDS/KTR-3
TOOL FOR DISMANTLING K-TECH KITS IDS/RDS/DDS/KTR-3
In stock
Spacer for lowering For all KYB/SHOWA shock absorbers with ID=12mm. Available: 1mm, 2mm and 3mm (=approx. 3mm, 6mm and 9mm at the rear)
In stock
In stock
In stock
In stock
In stock
TOOL FOR DISMANTLING K-TECH KITS IDS/RDS/DDS/KTR-3
In stock
Spacer for lowering For all WP 50mm Link shock absorbers Available in 1/2/3/9mm
In stock
Spacer for lowering For all WP Xplor shock absorbers with ID=12mm Available in: 2mm (=6mm at the rear) 6.5mm (=20mm at the rear) 9mm (=27mm at the rear)
In stock
Suitable for all 48 mm KYB forks!
In stock
NEW: Softer balance springs -> therefore less air pressure on the PSF fork possible with the same ride sag (e.g. for lighter riders). 1 set (2 pieces)
In stock
Nominal dimensions: 10 x 16 x 35 mm
In stock
For removing the nitrogen reservoir cover on shock absorbers. Suitable for the following shock absorbers (M4 thread): - BUD - C2P - ÖHLINS - K-TECH shock absorbers
In stock
14x24x5mm FOR SHOWA 49 FORKS
In stock
12.5 x 28 x 5 MM KYB
In stock
16 x 28 x 5 MM KYB
In stock
18x26.5x3.4 MM SACHS
Suitable for all 48 mm KYB forks!
In stock
GAS VALVE FOR FILLING WITHOUT WP NITROGEN STATION WP D58MM DIAMETER: 58MM
GAS VALVE FOR FILLING WITHOUT WP NITROGEN STATION WP LINK FROM 2016 DIAMETER: 64MM
In stock
Sliding bush for the spring holder of SHOWA 47 forks. Dimensions: 43.00 x 9.90 x 1.50 mm (outer Ø x height x wall thickness) 1 piece
In stock
Sliding bush for the spring holder of KYB 48 forks. Dimensions: 43.7 x 9.75 x 1.10 mm (outer Ø x height x wall thickness) 1 piece
In stock
Sliding bush for the spring holder of SHOWA 49 forks. dimensions: 45.1 x 9.83 x 1.50 mm (outer Ø x height x wall thickness) 1 piece
Items 51 - 100 of 297