VHM
Items 51 - 100 of 402
In stock
NUR INNERE O-RINGE
This sealkit can be used as replacement / spare part for the sealing of VHM cylinder head AA33112.
In stock
In stock
MIKUNI 4/042 MAIN NOZZLE #460
In stock
MIKUNI 4/042 MAIN NOZZLE #480
In stock
MIKUNI 4/042 MAIN NOZZLE #500
MIKUNI 4/042 MAIN NOZZLE #520
In stock
MIKUNI 4/042 MAIN NOZZLE #540
In stock
MIKUNI 4/042 MAIN NOZZLE #560
In stock
MIKUNI 4/042 MAIN NOZZLE #580 RECOMMENDED FOR HARD FLOOR / SAND FOR VHM TUNING KITS / PISTONS
In stock
MIKUNI 4/042 MAIN NOZZLE #600 RECOMMENDED FOR HARD FLOOR FOR VHM TUNING KITS / PISTONS
MIKUNI 4/042 MAIN NOZZLE #620 RECOMMENDED FOR MEDIUM / LOW SAND FOR VHM TUNING KITS / PISTONS
MIKUNI 4/042 MAIN NOZZLE #640 RECOMMENDED FOR LOW SAND FOR VHM TUNING KITS / PISTONS
In stock
SUITABLE FOR : E.G. YAMAHA YZ85 NGK BR10EG
In stock
NGK BR8EG
In stock
SUITABLE FOR : E.g. KTM SX125, YAMAHA YZ125 etc. NGK BR9ECMIX IRIDIUM
In stock
SUITABLE FOR : E.g. KTM SX125, YAMAHA YZ125 and many more NGK BR9EG
In stock
LR8B, thread diameter 10 mm, width across flats 16 mm
ONLY 1 PIECE AVAILABLE
ONLY FOR USE WITH VHM 12° PISTONS. BURNING CHAMBER VOLUME: 5.55 ccm SQUARE EDGE: 0.75 mm PISTON HEIGHT: +0.55 mm PISTON BOTTOM TYPE: FLAT ,12°
In stock
ONLY FOR USE WITH VHM 12° PISTONS. BURNING CHAMBER VOLUME: 5.40 ccm SQUARE EDGE: 0.75 mm PISTON HEIGHT: +0.55 mm PISTON BOTTOM TYPE: FLAT ,12°
In stock
ONLY FOR USE WITH VHM 12° PISTONS. BURNING CHAMBER VOLUME: 5.25 ccm SQUARE EDGE: 0.75 mm PISTON HEIGHT: +0.55 mm PISTON BOTTOM TYPE: FLAT ,12°
FOR MORE POWER AND BETTER PERFORMANCE CARBON
FOR MORE POWER AND BETTER PERFORMANCE MEDIUM VERSION
FOR MORE POWER AND BETTER PERFORMANCE SHORT VERSION
FOR MORE POWER AND BETTER PERFORMANCE CARBON
FOR MORE POWER AND BETTER PERFORMANCE CARBON
In stock
FOR MORE POWER AND BETTER PERFORMANCE CARBON MUST BE USED WITH POWERFLOWKIT
FOR MORE POWER AND BETTER PERFORMANCE CARBON
FOR MORE POWER AND BETTER PERFORMANCE CARBON
FOR MORE POWER AND BETTER PERFORMANCE CARBON
In stock
FOR MORE POWER AND BETTER PERFORMANCE CARBON
FOR MORE POWER AND BETTER PERFORMANCE CARBON
FOR MORE POWER AND BETTER PERFORMANCE CARBON
EXHAUST CONTROL (SLIDE) KTM SX65
For models from 2024, the valve only works with the ELKO cylinder.
Perfect running characteristics are not guaranteed for GILARDONI cylinders. It is possible that the slider may tilt like the original!
In stock
ADJUSTABLE EXHAUST CONTROL KTM SX65 2009- FOR MORE POWER AND BETTER PERFORMANCE
In stock
EXHAUST CONTROL (HOUSING) KTM SX65 2009 2019 FOR MORE POWER AND BETTER PERFORMANCE
EXHAUST CONTROL (PROGRESSIVE SPRING) KTM SX65 2009 2019 FOR BETTER PERFORMANCE
In stock
VHM EXHAUST FLANGE KTM TC/SX65 2009 2019 FOR MORE POWER AND BETTER PERFORMANCE
HIGH-COMP VHM BURNING CHAMBER BURNING CHAMBER VOLUME: 11.40 ccm SQUARE EDGE DIMENSION: 1.40 mm PISTON HEIGHT: 2 mm PISTON BOTTOM TYPE: ROUGHED
HIGH-COMP VHM BURNING CHAMBER BURNING CHAMBER VOLUME: 11.50 ccm SQUARE EDGE DIMENSION: 1.40 mm PISTON HEIGHT: 2 mm PISTON BOTTOM TYPE: ROUGHED
HIGH-COMP VHM BURNING CHAMBER BURNING CHAMBER VOLUME: 11.80 ccm SQUARE EDGE DIMENSION: 0.90 mm PISTON HEIGHT: -0.35 mm PISTON BOTTOM TYPE: FLAT BOTTOM
HIGH-COMP VHM BURNING CHAMBER FOR MORE TORQUE AT LOWER RPMS IDEAL FOR DEEP-SANDY AND/OR SMALLER STRETCHES BURNING CHAMBER VOLUME: 10.8 ccm SQUASH EDGE DIMENSION: 1.00 mm PISTON HEIGHT: -0.10 mm PISTON BOTTOM TYPE: FLAT BOTTOM
Items 51 - 100 of 402