Tools Fork

The K-Tech Off-Road Fork Work Station was designed for precision, organization, and efficiency, and is the ultimate service companion for suspension specialists and dedicated motorcycle enthusiasts. Designed to securely hold multiple fork components during disassembly and maintenance, this purpose-built work station keeps your workspace organized while allowing oil to drain safely from critical suspension parts.

The workstation was specifically designed for off-road forks to support inner and outer fork tubes, cartridges, shock rods, and shock assemblies during maintenance. Each component can be securely placed in its designated holders while excess fork oil drains away, preventing mess and improving workflow efficiency. Since all parts are stored upright and organized in a single compact station, technicians gain more usable workspace and better visibility, which helps streamline complex suspension maintenance tasks.

• Key Benefits

  • Secure Storage of Components—Safely stores fork tubes, cartridges, piston rods, and damping assemblies during maintenance.
  • Better Organization in the Workshop—Keeps suspension parts organized and easily accessible.
  • Oil Drain Management—Allows fork components to drain naturally while being held in place.
  • Space-saving design—Saves valuable bench space during suspension overhauls.
  • Precision tool for the workshop—Ideal for suspension technicians, racing teams, and ambitious mechanics.

YAMAHA TENERE FORK CLAMP TOOL CARTRIDGE

For filling forks and dampers with rubber plugs.

Tool for opening WP43 XACT PRO forks

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

-Clean surface

-No sanding block required

-Work faster and more efficiently

• For positioning the Delta shims on the WP rebound piston
• Suitable for Ø20 Delta shims and 23mm pistons
• Quick and easy to use
• Shims can no longer twist

• For holding the adjustment tabs during disassembly and assembly
• Suitable for forks and shock absorbers
• Oversized design, so it also works with standard aftermarket adjusters

K-Tech tools for front forks and shock absorbers are designed to help suspension technicians improve efficiency in their workshops. All tools were developed based on over twenty years of experience in the suspension industry to enable users to work effectively and safely.

K-Tech tools for front forks and shock absorbers are designed to help suspension technicians improve efficiency in their workshops. All tools have been developed based on over twenty years of experience in the suspension industry to enable users to work effectively and safely.

Quick and easy removal of the fork dust caps.

This adapter screws into the expansion tank cap of your shock absorber, allowing you to use the nitrogen filling tool for precise nitrogen filling.

It can also be used with PSF forks, making it a versatile tool for maintaining both KYB kit shocks and air forks for optimal performance.

S-TECH TOOL FOR RELIEVING PRESSURE ON FORK SPRINGS

- MAKES IT EASIER/SIMPLER TO REMOVE THE FORK SPRING ON ROAD BIKES!

S-TECH TOOL FOR REMOVING THE FORK CAP FROM THE PISTON ROD.

- FOR WP XPLOR FORKS WITH EXTERNAL SPRING PRELOAD

Removal lever for removing O-rings from fork tubes

Wrench for opening the SHOWA BPF fork

• Wrench size 45 mm, 8-sided
• Aluminum, CNC-machined, red anodized

-Clean surface

-No sanding block required

-Work faster and more efficiently

KYB tool for installing piston bands

Size: 25 mm

KYB tool for installing piston bands

Size: 25 mm

KYB PSF-1 Cartridge Tool

Wrench for opening the AER35 WP fork (2021 and later).

• Wrench size 39 mm, hex
• Aluminum, CNC-machined, red anodized

TOOL FOR REMOVING K-TECH KITS IDS/RDS/DDS/KTR-3

For holding/securing fork tubes

Material: Stainless steel, PVC-coated

Special wrench for the 48mm cone valve seat. Open design: Can also be used with the fork installed.


COLOR: RED

Wrench for adjusting the spring preload on WP Cone Valve / Xact-Pro forks; the wrench is also required for servicing the cartridge.

• 35 mm socket, t=4 mm

TOOL FOR ADJUSTING THE FORK'S SPRING RATE/AIR CHAMBER

MORE PROGRESSION AND IMPACT RESISTANCE THROUGH THE ADDITION OF FORK OIL
PRECISE DOSING VIA SCALE AND VOLUME LOCK
ADJUST THE SPRING RATE DIRECTLY ON THE TRACK
NO NEED TO REMOVE THE FORK
A MUST-HAVE FOR EVERY OFF-ROAD RIDER’S TOOLBOX

Wrench for opening ZF/Sachs forks with 50mm fork caps. 

• Spindle holder (slot for holding the piston rod).
• Wrench size 50 mm, 10-sided
• Aluminum, CNC-machined, red anodized

Adjustable socket wrench with interchangeable pins in various sizes
-3 mm
-4 mm
-5 mm

TOOL FOR OPENING THE DDS/RDS/25IDS CARTRIDGE

Socket wrench for securing/opening, e.g., the
- SHOWA compression unit (fork)
- Cartridge tubes

S-TECH TOOL FOR ADJUSTING THE COMPRESSION

- NO NEED TO REMOVE THE HANDLEBAR.
- THE SMALL 25MM DIAMETER ALLOWS FOR USE EVEN ON HARD-TO-REACH ADJUSTERS.

Tool set for removing O-rings and other seals

Adapter insert for opening the compression unit of the WP Conve Valve / Pro Components fork

REPLACEMENT CANNULA SUITABLE FOR OUR NEEDLE FILLING DEVICES WITH THE FOLLOWING PART NUMBER:
213-900-010
70240
70242

1 set (10 pieces)

S-TECH TOOL FOR ADJUSTING THE COMPRESSION

-NO NEED TO REMOVE THE HANDLEBAR
-WITH GUIDE

Fits all KYB CC forks.

Universal adapter with three wrench sizes for suspension workshops. The 22mm side has a hole and is therefore suitable, for example, as an adapter insert for opening the SHOWA SFF-AIR fork on the CRF 250 (screw connection with valve).
Wrench sizes:
19 mm
22 mm
24 mm