Tools Fork

Socket wrench for securing/opening, e.g., the
- SHOWA compression unit (fork)
- Cartridge tubes

-Clean surface

-No sanding block required

-Work faster and more efficiently

-Clean surface

-No sanding block required

-Work faster and more efficiently

Removal lever for removing O-rings from fork tubes

Special wrench for the 48mm cone valve seat. Open design: Can also be used with the fork installed.


COLOR: RED

YAMAHA TENERE FORK CLAMP TOOL CARTRIDGE

K-TECH TOOL FOR OPENING ÖHLINS FORKS

Bolt circle diameter: 39 mm
Pin diameter: 3.50 mm

TOOL FOR OPENING THE DDS/RDS/25IDS CARTRIDGE

Tool for opening WP43 XACT PRO forks

Tool for changing fork springs (WP35).

KTM SX50 (2012 and later)

KTM SX65 (2012 and later)

Fits all 48 mm fork diameters

K-Tech tools for front forks and shock absorbers are designed to help suspension technicians improve efficiency in their workshops. All tools were developed based on over twenty years of experience in the suspension industry to enable users to work effectively and safely.

Tool for disassembling the spring preload unit on K-TECH fork spring kits

Tool for replacing the fork springs on the SHOWA BIG PISTON FORK

This adapter screws into the expansion tank cap of your shock absorber, allowing you to use the nitrogen filling tool for precise nitrogen filling.

It can also be used with PSF forks, making it a versatile tool for maintaining both KYB kit shocks and air forks for optimal performance.

2-in-1 AIR PUMP FOR SUSPENSION AND TIRES (Schrader valve):

1. Precise adjustment of air pressure for air-sprung forks and shock absorbers using a short stroke, high-quality pressure sensor, and digital display

2. Inflating tires or air forks (with Schrader valve) using a detachable second cylinder with a large stroke volume

TOOL FOR OPENING ÖHLINS FORKS

Number of pins: 8
Bore diameter: 42 mm
Pin diameter: 2.50 mm

Adjustable socket wrench with interchangeable pins in various sizes
-3 mm
-4 mm
-5 mm

For filling forks and dampers with rubber plugs.

KYB tool for installing piston bands

Size: 25 mm

KYB tool for installing piston bands

Size: 25 mm

S-TECH TOOL FOR RELIEVING PRESSURE ON FORK SPRINGS

- MAKES IT EASIER/SIMPLER TO REMOVE THE FORK SPRING ON ROAD BIKES!

For quick and precise adjustment of the oil level or air chamber

4-piece tool set for removing and installing fork springs.

Universal tool for filling shock absorbers with
Schrader valves and
rubber plugs (needle filling)

The K-Tech Off-Road Fork Work Station was designed for precision, organization, and efficiency, and is the ultimate service companion for suspension specialists and dedicated motorcycle enthusiasts. Designed to securely hold multiple fork components during disassembly and maintenance, this purpose-built work station keeps your workspace organized while allowing oil to drain safely from critical suspension parts.

The workstation was specifically designed for off-road forks to support inner and outer fork tubes, cartridges, shock rods, and shock assemblies during maintenance. Each component can be securely placed in its designated holders while excess fork oil drains away, preventing mess and improving workflow efficiency. Since all parts are stored upright and organized in a single compact station, technicians gain more usable workspace and better visibility, which helps streamline complex suspension maintenance tasks.

• Key Benefits

  • Secure Storage of Components—Safely stores fork tubes, cartridges, piston rods, and damping assemblies during maintenance.
  • Better Organization in the Workshop—Keeps suspension parts organized and easily accessible.
  • Oil Drain Management—Allows fork components to drain naturally while being held in place.
  • Space-saving design—Saves valuable bench space during suspension overhauls.
  • Precision tool for the workshop—Ideal for suspension technicians, racing teams, and ambitious mechanics.