Tools Fork

VENTILATOR

TOOL FOR OPENING THE DDS/RDS/25IDS CARTRIDGE

4-piece tool set for removing and installing fork springs.

Tool for replacing the fork springs on the SHOWA BIG PISTON FORK

Tool for disassembling the spring preload unit on K-TECH fork spring kits

TOOL FOR REMOVING K-TECH KITS IDS/RDS/DDS/KTR-3

K-Tech tools for front forks and shock absorbers are designed to help suspension technicians improve efficiency in their workshops. All tools were developed based on over twenty years of experience in the suspension industry to enable users to work effectively and safely.

K-Tech tools for front forks and shock absorbers are designed to help suspension technicians improve efficiency in their workshops. All tools have been developed based on over twenty years of experience in the suspension industry to enable users to work effectively and safely.

Socket wrench for securing/opening, e.g., the
- SHOWA compression unit (fork)
- Cartridge tubes

Fits all 48 mm fork diameters

Tool set for removing O-rings and other seals

Wrench for opening the compression stage of the Showa 49mm cartridge

• Spindle holder (slot for holding the piston rod).
• Wrench size 50mm, 10-sided
• Aluminum, CNC-machined, red anodized

Wrench for adjusting the spring preload on WP Cone Valve / Xact-Pro forks; the wrench is also required for servicing the cartridge.

• 35 mm socket, t=4 mm

Special wrench for the 48mm cone valve seat. Open design: Can also be used with the fork installed.


COLOR: RED

For filling forks and dampers with rubber plugs.

Key to open

• the compression damping unit of the SHOWA SFF-AIR fork
• the rebound damping unit of the SHOWA Closed Cartridge fork (48 mm)
• the compression damping unit of all KYB closed-cartridge forks
• the spring side of the SHOWA SFF fork (cap with spring preload adjuster)
• SW 36 mm
• Aluminum, CNC-machined, red anodized

Wrench for opening Kayaba forks with a 49mm SW fork cap. 

• Spindle holder (slot for holding the piston rod). 
• Wrench size 49 mm, 8-sided
• Aluminum, CNC-machined, red anodized

Tool for opening WP43 XACT PRO forks

TOOL FOR ADJUSTING THE FORK'S SPRING RATE/AIR CHAMBER

MORE PROGRESSION AND IMPACT RESISTANCE THROUGH THE ADDITION OF FORK OIL
PRECISE DOSING VIA SCALE AND VOLUME LOCK
ADJUST THE SPRING RATE DIRECTLY ON THE TRACK
NO NEED TO REMOVE THE FORK
A MUST-HAVE FOR EVERY OFF-ROAD RIDER’S TOOLBOX

Wrench for opening all WP 48 forks

• Wrench size 50 mm, hex 
• Includes spindle holder (slot for holding the piston rod) 
• Aluminum, CNC-machined, red anodized

Key for opening the AER43 WP fork

• Includes spindle holder (slot for holding the piston rod) 
• Wrench size 45 mm, hex
• Aluminum, CNC-machined, red anodized

Key for opening the AER35 WP fork (up to model year 2020).

• Includes spindle holder (slot for holding the piston rod).
• Wrench size 40 mm, hex
• Aluminum, CNC-machined, red anodized

Key for opening Showa forks.

• Includes spindle holder (slot for holding the piston rod)
• Wrench size 50 mm, 8-sided
• Aluminum, CNC-machined, red anodized

Comparable OEM reference: 07WMA-KZ30100

Wrench for opening ZF/Sachs forks with 50mm fork caps. 

• Spindle holder (slot for holding the piston rod).
• Wrench size 50 mm, 10-sided
• Aluminum, CNC-machined, red anodized

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Tool for opening the plastic fork cover

Wrench for opening the AER35 WP fork (2021 and later).

• Wrench size 39 mm, hex
• Aluminum, CNC-machined, red anodized

Wrench for opening the SHOWA BPF fork

• Wrench size 45 mm, 8-sided
• Aluminum, CNC-machined, red anodized

2-in-1 AIR PUMP FOR SUSPENSION AND TIRES (Schrader valve):

1. Precise adjustment of air pressure for air-sprung forks and shock absorbers using a short stroke, high-quality pressure sensor, and digital display

2. Inflating tires or air forks (with Schrader valve) using a detachable second cylinder with a large stroke volume

For holding/securing fork tubes

Material: Stainless steel, PVC-coated

Removal lever for removing O-rings from fork tubes

Plate for securing the fork piston rod
allows the piston rod screw connection to be loosened
Combination holder (fits Ø10, Ø12, Ø12.5, Ø14)
Aluminum T6061 - CNC-machined, anodized

Tool for removing and holding the fork piston rod

-> for bleeding the fork
-> for removing the piston rod to install the screw connection

Thread sizes:
M13 x 1.0