S-TECH RACING
Items 51 - 100 of 1137
In stock
One-piece clamping jaw for clamping shock absorber housings, suitable for KYB shock absorber housings with 50 mm piston diameter, e.g. KYB 50, e.g. YZ450F
In stock
One-piece clamping jaw for clamping outer fork tubes, suitable for outer fork tubes e.g. from: - KYB 48 - SHOWA 48/49 - SACHS 48
In stock
One-piece clamping jaw for clamping outer fork tubes. Suitable for outer fork tubes, e.g. from all WP 48 forks
In stock
ALUMINUM CLAMPING JAW SET WITH TWO CLAMPING DIAMETERS: D = 13 / 8 MM
In stock
The bottom bracket puller set contains the following adapters for use with a wide range of diameters without having to preload the expanding sleeve.
- Adapter 8-11mm
- Adapter 10-13mm
- Adapter 12-15mm
- Adapter 15-17mm
- Adapter 17-20mm
- Adapter 20-24mm
- Adapter 25-29mm
The tool can be used with the supplied supports (adjustment range 22-80mm) or a swing hammer.
In stock
COLOR: BLACK
In stock
EXHAUST SPRING IN VARIOUS LENGTHS: 57 MM 75 MM 99 MM ADVANTAGES: MADE OF STAINLESS SPRING STEEL WITH ROTATING HOOKS
In stock
Spring kit and bolts for attaching the footrests Scope of delivery: bolts, springs, split pins & washers
In stock
SIGNIFICANTLY FACILITATES ADJUSTMENT DUE TO HIGHER EDGES. COLOR: BLUE
In stock
SIGNIFICANTLY FACILITATES ADJUSTMENT DUE TO HIGHER EDGES. COLOR: RED
In stock
SIGNIFICANTLY FACILITATES ADJUSTMENT DUE TO HIGHER EDGES. COLOR: BLACK
In stock
FACTORY TITANIUM BRAKE TIP MATERIAL : TITANIUM
In stock
Handlebar clamp 28.6 MM
In stock
Available colors: - black - blue - orange - green
New
Key for opening the AER35 WP fork (from 2021).
- Width across flats 39mm
- hexagonal
- Aluminum
Color: red
ALUMINUM GAS TWIST GRIP SLEEVE WITH BALL BEARING COLOR: BLUE
In stock
ALUMINUM GAS TWIST GRIP SLEEVE WITH BALL BEARING SHORT-STROKE VERSION COLOR: BLACK
In stock
For adjusting the spring preload on WP struts with the plastic preload ring (or our aluminum preload ring). Only for WP shocks with the 50 mm housing. Not suitable for Xplor shocks FIT FOR WP shocks UP TO YEAR 2015 !
In stock
COLOR: BLACK
In stock
COLOR: BLUE
In stock
WORK PROCESS OPTIMIZING SYSTEM ESPECIALLY FOR THE CHASSIS SECTOR. FAST AND SAFE CLAMPING OF: FORKS SHOCK ABSORBERS PISTON RODS AND OTHER TUBE PROFILES ONE TOOL FOR ALL CLAMPING OPERATIONS. THE QUICK-CHANGE SYSTEM MAKES THE PROCESSING OF CHASSIS FASTER AND MORE CONVENIENT. INTERCHANGEABLE INSERTS AVAILABLE IN DIAMETERS FROM 6-60 MM THE HOLDER IS SUPPLIED WITHOUT INTERCHANGEABLE INSERTS !!! CLAMPING PINS AT THE TOP AND SIDES ARE NO LONGER AVAILABLE !!!
In stock
Set Consisting of: - 2 nuts - 2 spacers Available in: - black - blue - orange - green
In stock
NEW: TUNING piston for standard shock absorbers and standard setting. 50/16 means: Da/Di -> outer diameter piston / inner diameter piston or inner diameter shims
BLACK LEVER ORANGE TIP SX65 2024- TC65 2024- MC65 2024-
In stock
The S-TECH mud scraper is your quick little helper for removing mud/dirt, e.g. between your training sessions or races. Each mud scraper comes with an ergonomic S-TECH rubber grip and is available in the colors - black/red - red/red - black/orange
In stock
In stock
Holder for storing the shim stacks during the chassis service
In stock
Material: Sandvik 20C. PU: 10 pieces
In stock
High-quality driver for fitting radial shaft seals.
Sizes:
- 35 mm
- 36 mm
- 37 mm
- 41 mm
- 43 mm
- 45 mm
- 46 mm
- 46/47 mm
- 47 mm
- 48 mm
- 49 mm
- 50 mm
In stock
Spacer for lowering the shock absorber. Available diameters and heights: D=50mm, H=5mm D=50mm, H=10mm D=46mm, H=5mm D=46mm, H=10mm Suitable for all shock absorbers with 46mm and 50mm housing diameter and with round safety clip.
In stock
2-part spacer for lowering the shock absorber -> No disassembly of the piston rod required! Available diameters and heights: D=50mm, H=8mm D=46mm, H=8mm Suitable for all shock absorbers with 46 and 50 mm housing diameter and with round safety clip.
In stock
SUITABLE FOR ALL 43MM FORKS Available in 3 thicknesses: t= 2 mm t = 3 mm t = 5 mm For preloading fork springs or compensating distances Dimensions: 27.30 x 38.10 x 2/3/5 (di x da x t)
In stock
SUITABLE FOR ALL 48MM FORKS Available in 3 thicknesses: t= 2 mm t = 5 mm t = 10 mm For pre-tensioning fork springs or compensating distances. dimensions: 35.2 x 43.5 x 2/5/10 (di x da x t)
In stock
Versions Di: - 12.5 mm - 14 mm - 16 mm - 18 mm
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
NOT PERMITTED WITHIN THE SCOPE OF THE STVO! NO ABE AVAILABLE!
In stock
In stock
In stock
For SACHS suspension struts
Items 51 - 100 of 1137