S-TECH RACING
Stop Buffers for WP Shock Absorbers
Size:
57 mm x 18 mm x 46 mm (D x W x H)
Coated with UV protection.
Hot-start lever for mounting on the Magura clutch lever.
With nylon slip sleeve.
Spring kit and bolts for mounting the footrests
Included:
Bolts, springs, cotter pins, and washers
Spring kit and bolts for attaching the footrests
Included:
Bolts, springs, cotter pins, and washers
Spring kit and bolts for mounting the footrests
Included:
Bolts, springs, cotter pins, and washers
Tool for installing slide bushings in sealing heads
Diameter:
12 mm
12.5 mm
14 mm
16 mm
18 mm
Available pressures:
- 1.4 bar (65/85/125 cc)
- 1.6 bar (250 cc 2- and 4-stroke)
- 1.8 bar (450 4-stroke)
Hole spacing: 26 mm
With this tool, you can easily and conveniently remove the expansion tank from WP shock absorbers.
Hole spacing: 32.9 mm
Advantages:
- No slipping
- No damage to the housing
For removing the nitrogen reservoir cap on shock absorbers.
Fits all shock absorbers with a Schrader valve (KYB/SHOWA/SACHS)
Seal Head Kit 36 x 14 mm
FOR BUD RACING SHOCK ABSORBERS (50cc and 65cc)
Compatible with, for example, CR80, CR85, CRF150, RM85
Seal Head Kit 40 x 14 mm
FOR BUD RACING SHOCK ABSORBERS (85cc)
Dimensions:
e.g., for Showa until 1990
,
Dimensions:
,
Compatible with:
- Husqvarna
- Beta
- Gas Gas (each for Sachs shock absorbers with this 50x16 sealing head)
Showa models with coil springs
Compatible with: - Husqvarna - Beta - Gas Gas (models designed for Sachs shock absorbers with this 50x18 seal head)
TO REMOVE AND INSTALL THE SEALING HEAD
AVAILABLE IN 4 SIZES:
30–36 mm
40–46 mm
46–50 mm
WP 50 MM
Compatible with: WP48
Dimensions: 50 x 57.50 x 1.5 mm (Diameter x Width x Depth)
Packaging unit: 1 piece
Material: Steel
Surface finish: burnished (black)
Replacement inserts for the S-TECH clamping system. The clamping system itself is no longer available; only the individual replacement inserts are available for retrofitting clamping systems that have already been purchased.
COLOR: BLACK
REPLACEMENT PIN FOR THESE S-TECH TOOLS:
- S-TECH TOOL WP LINK DAMPER
- S-TECH TOOL WP PDS DAMPER
1 PIECE
DIMENSIONS:
18.90 x 26 x 100 mm
(Inner Diameter x Outer Diameter x Length)
Available spring rates (linear):
- 1.42 kg/mm
- 1.90 kg/mm
- 2.10 kg/mm
Impact tool for adjusting spring preload.
-> Adjusting the preload rings without removing the shock absorber or frame component
-> Heavy-duty design
-> Wide tip made of soft metal protects the pins of the preload rings
TITANIUM BLOODING SCREW FOR KYB/SHOWA/SACHS FORKS M5
INCLUDES O-RING
TORX DRIVE (TX20)
1 PIECE
Includes O-ring
Phillips screw M4 x 10 mm (WP "new")
1 PIECE
Includes O-ring
Phillips screw M4 x 8 mm (WP "old")
1 PIECE
Large size for all standard forks 125cc and up
Design: S-TECH logo on transparent film
1 set (2 pieces)
Small size -> Fits, for example, the forks of the KTM SX50/65 models
Design: S-TECH logo on transparent film
1 set (2 pieces)
