Tools Shock Absorber
Impact tool for adjusting the spring preload.
-> Adjusting the preload rings without dismantling the suspension strut or frame part
-> Heavy-duty design
-> Wide tip made of soft metal protects the pins of the preload rings
Pin wrench for holding/opening, e.g. the
- SHOWA pressure stage unit (fork)
- Cartridge tubes
TOOL FOR POSITIONING THE SEPARATING PISTON IN THE COMPENSATION TANK.
Separator piston position continuously adjustable by means of scaling and lockable stop plate.
THE ALTERNATIVE TO VACUUM PUMPS: S-TECH VENT BOTTLE FOR VENTING SHOCK ABSORBERS OR FORKS. FOR A CLEAN WORK BENCH AND GOOD VENTING RESULTS!
S-TECH SHOCK ABSORBER BLEEDING ADAPTER SET
Consisting of 15 adapters for connecting a vacuum pump (or venting bottle) to the most common types of shock absorbers.
2-in-1 AIR PUMP FOR CHASSIS AND TIRES (Schrader valve):
1. Precise adjustment of air pressure in air-suspension forks and shock absorbers using a small stroke, high-quality measuring sensor, and digital display
2. Inflate tires or air forks (with Schrader valve) using a lockable second cylinder with large stroke volume
Tool for installing the original KYB 50 mm piston rings
TOOL FOR MILLING THE PISTON ROD.
-> MILL AWAY THE SCREW SECURING DEVICE (REPLACEMENT/STOP OF THE THREAD) SO THAT THE NUTS OF THE PISTON RODS CAN BE OPENED.
-> THE INTERNAL PARTS OF THE PISTON ROD REMAIN SECURED.
-> MILLING CUTTER SUITABLE FOR KYB PISTON RODS (M12)
TOOL FOR MILLING THE PISTON ROD.
-> MILL AWAY THE SCREW SECURING DEVICE (REPLACEMENT/STOP OF THE THREAD) SO THAT THE NUTS OF THE PISTON RODS CAN BE OPENED.
-> THE INTERNAL PARTS OF THE PISTON ROD REMAIN SECURED.
-> MILLING CUTTER SUITABLE FOR SHOWA PISTON RODS (M12)
KYB special nut for triple adjuster
This adapter is screwed into the reservoir cap of your shock absorber so that you can use the nitrogen filling tool for precise nitrogen filling.
It can also be used for PSF forks, making it a versatile tool for servicing both KYB kit dampers and air forks for optimum performance.
With this tool, you can easily and conveniently remove the expansion tank from WP dampers.
Hole spacing 32.9 mm
Advantages:
- No slipping possible
- No damage to the housing
Hole spacing: 26 mm
Tool for removing and installing the pressure stage adjuster on the new (23) WP XACT 5448 dampers.
SUITABLE FOR:
- KTM SX/SX-F MODELS FROM 2023
- HUSQVARNA FC/TC MODELS FROM 2023
Tools Shock Absorber: engineered for motocross and enduro riders. Strong materials, precise fitment and reliable performance.