Tools Shock Absorber
For removing the KYB/SHOWA shock absorber compression stage adjuster (19 mm).
This K-Tech shock absorber tool is designed for removing and installing the K-Tech KYB RCU compression adjuster
This tool fits: -
K-Tech tools for front forks and shock absorbers have been developed to help suspension technicians improve efficiency in their workshops. All tools have been developed with over twenty years of experience in the suspension industry to enable users to work effectively and safely.
This transparent adapter is intended for use in conjunction with the K-Tech vacuum machine to visually check that the air has been removed from the process.
Assembly tool for tightening the bladder kit from K-TECH
Damper diameter: 60 mm
Inner diameter: 65 mm
WP LINK 2016-2022
Assembly tool for tightening the K-TECH bladder kit
Damper diameter: 40 mm
Inner diameter: 48 mm
WP 50/65cc (2024>)
Suitable for item number 50399.
Suitable for item number 50402.
With this tool, you can easily and conveniently remove the expansion tank from WP dampers.
Hole spacing 32.9 mm
Advantages:
- No slipping possible
- No damage to the housing
Impact tool for adjusting the spring preload.
-> Adjusting the preload rings without dismantling the suspension strut or frame part
-> Heavy-duty design
-> Wide tip made of soft metal protects the pins of the preload rings
Pin wrench for holding/opening, e.g. the
- SHOWA pressure stage unit (fork)
- Cartridge tubes
TOOL FOR POSITIONING THE SEPARATING PISTON IN THE COMPENSATION TANK.
Separator piston position continuously adjustable by means of scaling and lockable stop plate.
Assembly sleeves for mounting sealing heads.
5-piece set consisting of (Da x Di):
12.5 x 10 mm
14 x 12 mm
16 x 12 mm
18 x 12 mm
18 x 16 mm
Tool for removing and installing the pressure stage adjuster on the new (23) WP XACT 5448 dampers.
SUITABLE FOR:
- KTM SX/SX-F MODELS FROM 2023
- HUSQVARNA FC/TC MODELS FROM 2023
Hole spacing: 26 mm
TOOL FOR MILLING THE PISTON ROD.
-> MILL AWAY THE SCREW SECURING DEVICE (REPLACEMENT/STOP OF THE THREAD) SO THAT THE NUTS OF THE PISTON RODS CAN BE OPENED.
-> THE INTERNAL PARTS OF THE PISTON ROD REMAIN SECURED.
-> MILLING CUTTER SUITABLE FOR SHOWA PISTON RODS (M12)
TOOL FOR MILLING THE PISTON ROD.
-> MILL AWAY THE SCREW SECURING DEVICE (REPLACEMENT/STOP OF THE THREAD) SO THAT THE NUTS OF THE PISTON RODS CAN BE OPENED.
-> THE INTERNAL PARTS OF THE PISTON ROD REMAIN SECURED.
-> MILLING CUTTER SUITABLE FOR KYB PISTON RODS (M12)
Tools Shock Absorber: engineered for motocross and enduro riders. Strong materials, precise fitment and reliable performance.