Tools Shock Absorber
Impact tool for adjusting the spring preload.
-> Adjusting the preload rings without dismantling the suspension strut or frame part
-> Heavy-duty design
-> Wide tip made of soft metal protects the pins of the preload rings
For removing the KYB/SHOWA shock absorber compression stage adjuster (19 mm).
TOOL FOR POSITIONING THE SEPARATING PISTON IN THE COMPENSATION TANK.
Separator piston position continuously adjustable by means of scaling and lockable stop plate.
TOOL FOR MILLING THE PISTON ROD.
-> MILL AWAY THE SCREW SECURING DEVICE (REPLACEMENT/STOP OF THE THREAD) SO THAT THE NUTS OF THE PISTON RODS CAN BE OPENED.
-> THE INTERNAL PARTS OF THE PISTON ROD REMAIN SECURED.
-> MILLING CUTTER SUITABLE FOR KYB PISTON RODS (M12)
TOOL FOR MILLING THE PISTON ROD.
-> MILL AWAY THE SCREW SECURING DEVICE (REPLACEMENT/STOP OF THE THREAD) SO THAT THE NUTS OF THE PISTON RODS CAN BE OPENED.
-> THE INTERNAL PARTS OF THE PISTON ROD REMAIN SECURED.
-> MILLING CUTTER SUITABLE FOR SHOWA PISTON RODS (M12)
Tool for removing and installing the pressure stage adjuster on the new (23) WP XACT 5448 dampers.
SUITABLE FOR:
- KTM SX/SX-F MODELS FROM 2023
- HUSQVARNA FC/TC MODELS FROM 2023
This K-Tech shock absorber tool is designed for removing and installing the K-Tech KYB RCU compression adjuster
This tool fits: -
Hole spacing: 26 mm
With this tool, you can easily and conveniently remove the expansion tank from WP dampers.
Hole spacing 32.9 mm
Advantages:
- No slipping possible
- No damage to the housing
Pin wrench for holding/opening, e.g. the
- SHOWA pressure stage unit (fork)
- Cartridge tubes
2-in-1 AIR PUMP FOR CHASSIS AND TIRES (Schrader valve):
1. Precise adjustment of air pressure in air-suspension forks and shock absorbers using a small stroke, high-quality measuring sensor, and digital display
2. Inflate tires or air forks (with Schrader valve) using a lockable second cylinder with large stroke volume
Suitable for item number 50399.
Suitable for item number 50402.
Assembly sleeves for mounting sealing heads.
5-piece set consisting of (Da x Di):
12.5 x 10 mm
14 x 12 mm
16 x 12 mm
18 x 12 mm
18 x 16 mm
Tools Shock Absorber: engineered for motocross and enduro riders. Strong materials, precise fitment and reliable performance.