Tools Shock Absorber

TOOL FOR MILLING THE PISTON ROD.

-> MILL AWAY THE SCREW SECURING DEVICE (REPLACEMENT/STOP OF THE THREAD) SO THAT THE NUTS OF THE PISTON RODS CAN BE OPENED.

-> THE INTERNAL PARTS OF THE PISTON ROD REMAIN SECURED.

-> MILLING CUTTER SUITABLE FOR KYB PISTON RODS (M12)

TOOL FOR MILLING THE PISTON ROD.

-> MILL AWAY THE SCREW SECURING DEVICE (REPLACEMENT/STOP OF THE THREAD) SO THAT THE NUTS OF THE PISTON RODS CAN BE OPENED.

-> THE INTERNAL PARTS OF THE PISTON ROD REMAIN SECURED.

-> MILLING CUTTER SUITABLE FOR SHOWA PISTON RODS (M12)

KYB special nut for triple adjuster

This K-Tech shock absorber tool is designed for removing and installing the K-Tech KYB RCU compression adjuster

This tool fits: -

Suitable for item number 50402.

Suitable for item number 50399.

Tool for installing the original KYB 50 mm piston rings

This adapter is screwed into the reservoir cap of your shock absorber so that you can use the nitrogen filling tool for precise nitrogen filling.

It can also be used for PSF forks, making it a versatile tool for servicing both KYB kit dampers and air forks for optimum performance.

Assembly tool for tightening the K-TECH bladder kit

Damper diameter: 40 mm

Inner diameter: 48 mm

WP 50/65cc (2024>)

For removing the KYB/SHOWA shock absorber compression stage adjuster (19 mm).

Assembly tool for tightening the bladder kit from K-TECH

Damper diameter: 60 mm

Inner diameter: 65 mm

WP LINK 2016-2022

K-Tech tools for front forks and shock absorbers have been developed to help suspension technicians improve efficiency in their workshops. All tools have been developed with over twenty years of experience in the suspension industry to enable users to work effectively and safely.

This transparent adapter is intended for use in conjunction with the K-Tech vacuum machine to visually check that the air has been removed from the process.

Pin wrench for holding/opening, e.g. the
- SHOWA pressure stage unit (fork)
- Cartridge tubes

Tool for removing and installing the pressure stage adjuster on the new (23) WP XACT 5448 dampers.

SUITABLE FOR:
- KTM SX/SX-F MODELS FROM 2023
- HUSQVARNA FC/TC MODELS FROM 2023

Hole spacing: 26 mm

With this tool, you can easily and conveniently remove the expansion tank from WP dampers.

Hole spacing 32.9 mm

Advantages:

- No slipping possible

- No damage to the housing

Impact tool for adjusting the spring preload.

-> Adjusting the preload rings without dismantling the suspension strut or frame part

-> Heavy-duty design

-> Wide tip made of soft metal protects the pins of the preload rings

Assembly sleeves for mounting sealing heads.

5-piece set consisting of (Da x Di):
12.5 x 10 mm
14 x 12 mm
16 x 12 mm
18 x 12 mm
18 x 16 mm

2-in-1 AIR PUMP FOR CHASSIS AND TIRES (Schrader valve):

1. Precise adjustment of air pressure in air-suspension forks and shock absorbers using a small stroke, high-quality measuring sensor, and digital display

2. Inflate tires or air forks (with Schrader valve) using a lockable second cylinder with large stroke volume

S-TECH SHOCK ABSORBER BLEEDING ADAPTER SET

Consisting of 15 adapters for connecting a vacuum pump (or venting bottle) to the most common types of shock absorbers.

THE ALTERNATIVE TO VACUUM PUMPS: S-TECH VENT BOTTLE FOR VENTING SHOCK ABSORBERS OR FORKS. FOR A CLEAN WORK BENCH AND GOOD VENTING RESULTS!