S-TECH RACING
High-density seat foam (2 cm thicker) RMZ 450 (2008–2017)
Standard height + 2 cm
High-Density Seat Foam, Thick (+2 cm) CRF 150 (2007–)
Standard height + 2 cm
High-density seat foam (2 cm higher) KTM SX/SXF (2016–)
Standard height + 2 cm
High-Density Seat Foam, Extra Thick (+2 cm) KTM SX/SXF (04-06), EXC (04-07)
Standard height + 2 cm
High-Density Seat Foam, Raised (+2 cm) KTM SX 85 (2013–2017), Husqvarna TC 85 (2014–)
Standard height + 2 cm
High-density seat foam (raised by 2 cm) CRF 450 (02-04)
Standard height + 2 cm
High-Density Seat Foam, Thicker (+2 cm) CRF 250 (2014-), CRF 450 (2013-)
Standard height + 2 cm
High-Density Seat Foam, Thick (+2 cm) KX 85 (2014–)
Standard height + 2 cm
High-density seat foam (raised by 2 cm) RMZ 250 (07-09)
Standard height + 2 cm
High-density bench foam (2 cm thick)
Fits:
KTM SX 85 (2018–)
GAS GAS MC85 (2021–)
High-density seat foam (2 cm thicker) HUSQVARNA TC/FC (2016–)
Standard height + 2 cm
High-Density Bench Foam (Taller by 2 cm)
Standard height + 2 cm
High-Density Seat Foam STD YZ 125/250 (2002–2021)
Standard height
High-Density Bench Foam STD
Standard height
For measuring the fork's penetration depth.
35–42 mm
Material: HNBR
Sturdy design for permanent mounting on the fork leg
For dip tubes with a diameter of 35–42 mm.
For measuring the fork's insertion depth.
43–52 mm
Material: HNBR
Sturdy design for permanent mounting on the fork steerer tube
For immersion tubes with a diameter of 43–52 mm.
SLEEVES FOR REDUCING FORK TRAVEL (E.G., WHEN LOWERING THE VEHICLE)
The sleeves are simply slid onto the piston rod, thereby limiting the fork’s travel—for example, to lower the vehicle.
Suitable for:
12 / 12.5 mm piston rods (WP/SHOWA/KYB)
14 mm piston rods (WP)
ALUMINUM CLAMP JAW SET WITH TWO CLAMPING DIAMETERS:
D = 16 / 18 mm
ALUMINUM CLAMP JAW SET WITH TWO CLAMPING DIAMETERS:
D = 10 / 12.5 mm
Tool for removing and holding the fork piston rod
-> for bleeding the fork
-> for removing the piston rod to install the threaded fitting
-> 4 thread sizes integrated, allowing it to accommodate the most common piston rods.
-> Extra-long version (L=300 mm)
4 thread sizes:
- M12 x 1.25
- M12 x 1.0
- M10 x 1.25
- M10 x 1.0
Plate for securing the fork piston rod
allows the piston rod screw connection to be loosened
Combination holder (fits Ø10, Ø12, Ø12.5, Ø14)
Aluminum T6061 - CNC-machined, anodized
Tool for installing the locknut on all BOSCH Gen.3 and Gen.4 e-bike motors
1/2" drive for installation using a torque wrench
SW24 socket for installation using a ring spanner
Plastic mounting sleeves for installing fork seals.
8-piece set consisting of:
36 MM
41 mm
43 mm
45 mm
46 mm
47 mm
48 mm
49 MM
O-ring for the nitrogen filling screw on the expansion tank of WP shock absorbers
ADAPTER WHEEL HUB SLEEVES 25MM->22MM FOR KTM, HUSQVARNA 2023
THESE ADAPTERS ALLOW THE USE OF REAR WHEELS (25MM AXLE) FROM THE FOLLOWING MODELS
- KTM: all SX and SX-F models through 2022
- HUSQVARNA: all FC models through 2022
- GASGAS: all MC 2023 models
IN THE FOLLOWING MOTORCYCLE MODELS WITH A 22MM AXLE:
- KTM: all SX and SX-F models from 2023
- HUSQVARNA: all FC models from 2023
Material: Sandvik 20C.
Pack size: 10 pieces
2-in-1 AIR PUMP FOR SUSPENSION AND TIRES (Schrader valve):
1. Precise adjustment of air pressure for air-sprung forks and shock absorbers using a short stroke, high-quality pressure sensor, and digital display
2. Inflating tires or air forks (with Schrader valve) using a detachable second cylinder with a large stroke volume
Fits handlebars with a diameter of 22.2 mm
Adjustable to 4 different heights:
+ 20 mm
+ 25 mm
+ 30 mm
+ 35 mm
Hole spacing: 40 mm
Slotted holes also allow for a spacing of 37.3 mm to 42.7 mm.
No ABE!
FOR SYMMETRICAL HANDLEBAR MOUNTS ONLY!
Fits handlebars with a diameter of 28.6 mm
Adjustable to 4 different heights:
+ 24 mm
+ 29 mm
+ 34 mm
+ 39 mm
Hole spacing: 40 mm
Slotted holes also allow for a spacing of 37.3 mm to 42.7 mm.
Without ABE!
ONLY FOR SYMMETRICAL HANDLEBAR MOUNTS!
DRIVESHAFT REPAIR KIT
KTM / HUSQVARNA / HUSABERG / POLARIS
DRIVE SHAFT REPAIR KIT
KTM / HUSQVARNA / HUSABERG
DRIVE SHAFT REPAIR KIT
KTM / HUSQVARNA
DRIVE SHAFT REPAIR KIT
KTM / HUSQVARNA
HONDA DRIVESHAFT REPAIR KIT
DRIVESHAFT REPAIR KIT FOR HONDA
KAWASAKI DRIVESHAFT REPAIR KIT
DRIVESHAFT REPAIR KIT
SUZUKI RM
DRIVESHAFT REPAIR KIT
SUZUKI RM
DRIVESHAFT REPAIR KIT
SUZUKI RM/RMZ
DRIVE SHAFT REPAIR KIT
SUZUKI RM/RMZ
DRIVESHAFT REPAIR KIT
SUZUKI RMZ
DRIVESHAFT REPAIR KIT
YAMAHA
DRIVE SHAFT REPAIR KIT
YAMAHA
DRIVESHAFT REPAIR KIT
YAMAHA
DRIVESHAFT REPAIR KIT
YAMAHA
COLOR: BLACK
FOR REPAIRING DENTS IN EXHAUST MUFFLERS.
--SUITABLE FOR NEARLY ALL MX AND ENDURO EXHAUST MUFFLERS--
