Items 1 - 48 of 48
BUSHING EXTRACTOR SET FOR REMOVING SLIDING BUSHINGS FROM SEALING HEADS 4 SIZES: 12.5 / 14 / 16 / 18 MM UNIVERSAL HOLDER FOR HOLDING SEALING HEADS FROM 36 - 50 MM DIAMETER HIGH-STRENGTH MANDRELS. MATERIAL 1.4305, X8CrNiS18-9 (SS 303)
TOOL FOR MILLING OFF THE PISTON ROD. -> MILLS AWAY THE SCREW LOCK (CRIMPING/ CAULKING OF THE THREAD) SO THAT THE NUT OF THE PISTON ROD CAN BE OPENED. -> THE INNER PARTS OF THE PISTON ROD REMAIN SECURED. -> MILLING CUTTER SUITABLE FOR KYB PISTON RODS (M12)
TOOL FOR MILLING OFF THE PISTON ROD. -> MILLS AWAY THE SCREW LOCK (CRIMPING/ CAULKING OF THE THREAD) SO THAT THE NUT OF THE PISTON ROD CAN BE OPENED. -> THE INNER PARTS OF THE PISTON ROD REMAIN SECURED. -> MILLING CUTTER SUITABLE FOR SHOWA PISTON RODS (M12)
Tool for disassembling and assembling the pressure stage adjuster
TO PULL OUT THE PISTON ROD UNIT SIMPLE FUNCTIONAL TEST OF A DAMPER (QUALITATIVE TEST OF DAMPING RESISTANCE) TEST THE DEGREE OF BLEEDING OF THE DAMPER HEIGHT-ADJUSTABLE SUITABLE FOR ALL COMMON SHOCK ABSORBERS
TOOL FOR REMOVING THE SHOCK ABSORBER CAP. SUITABLE FOR KYB / SHOWA AND WP SHOCK ABSORBERS. ADJUSTABLE DIAMETER (UP TO 59MM)
Adjustable face wrench with interchangeable pins in various sizes -3mm -4mm -5mm
Spigot wrench for holding/opening e.g. the - SHOWA compression unit (fork) - Cartridge tubes
Adapter set for retrofitting the WP filling station (item no. 1110). Suitable adapters for filling the new WP shock absorbers.
Tool set for removing O-rings and other seals
Tool for removing and installing the expansion tank of the WP XPLOR damper FIT FOR: - KTM EXC/ EXC-F models from 2024 onwards
For filling KYB KIT shock absorbers and PSF forks.
REPLACEMENT CHANNELS SUITABLE FOR OUR NEEDLE FILLING DEVICES WITH ARTICLE NUMBER: 213-900-010 70240 1 set (10 pieces)
Assembly tool for tightening the K-TECH bladder kit Diameter : 56MM
Tool for removing and installing the compression adjuster of the new (23 mm) WP XACT 5448 dampers. SUITABLE FOR: - KTM SX/SX-F MODELS FROM 2023 - HUSQVARNA FC/TC MODELS FROM 2023
For dismantling the piston rod on WP shock absorbers (lock nut on the base) Also suitable for dismantling the KYB/SHOWA compression stage adjuster with SW 24mm
Tool for mounting and dismounting the reservoir of the WP XACT 5448 shock absorber SUITABLE FOR: - KTM SX-F/SX MODELS FROM 2023 - HUSQVARNA FC/TC MODELS FROM 2023
For removing the nitrogen reservoir cover on shock absorbers. Suitable for the following shock absorbers (M4 thread): - BUD - C2P - ÖHLINS - K-TECH shock absorbers
Tool for fitting sliding bushes in rotary joints Diameter: 12 mm 12.5 mm 14 mm 16 mm 18 mm
FOR REMOVING AND INSTALLING THE SEALING HEAD 4 SIZES AVAILABLE: 30-36 MM 40-46 MM 46-50 MM WP 50 MM
REPLACEMENT PIN FOR THESE S-TECH TOOLS: - S-TECH TOOL WP LINK DAMPER - S-TECH TOOL WP PDS DAMPER 1 PIECE
Impact tool for adjusting the spring preload -> Adjusting the preload rings without dismantling the strut or frame part -> Heavy-duty design -> Wide tip made of soft metal protects the pins of the preload rings
For adjusting the spring preload.
Mounting sleeves for mounting sealing heads. 5-piece set consisting of (Da x Di): 12.5 x 10 mm 14 x 12 mm 16 x 12 mm 18 x 12 mm 18 x 16 mm
Assembly tool for tightening the K-TECH bladder kit Diameter : 74 MM
2-in-1 AIR PUMP FOR BIKES AND TIRES: 1. precise adjustment of the air pressure for air-sprung forks and shock absorbers using a small stroke and high-quality measuring sensor and digital display and 2. inflation of tires or air forks using an unlockable second cylinder with a large stroke volume
S-TECH SHOCK ABSORBER FILLING ADAPTER SET Consisting of 15 adapters for connecting a vacuum pump (or bleed bottles) to the most common shock absorber types. see article description -->
For removing the nitrogen reservoir cap on shock absorbers. Suitable for all shock absorbers with Schrader valve (KYB/SHOWA/SACHS)
With this tool, you can easily and conveniently detach the expansion tank from Wp dampers. Advantages: -No slipping possible -No damage to the housing
S-TECH TOOL WP PDS With this tool, you can easily and conveniently detach the expansion tank from Wp dampers. Advantages: -No slipping possible -No damage to the housing
THE ALTERNATIVE TO THE VACUUM PUMP: S-TECH BLEED KIT FOR BLEEDING SHOCK ABSORBERS OR FORKS. CONSISTING OF BLEED BOTTLE AND ADAPTER SET. FOR A CLEAN WORKBENCH AND GOOD BLEEDING RESULTS!
THE ALTERNATIVE TO THE VACUUM PUMP: S-TECH BLEED BOTTLE FOR BLEEDING SHOCK ABSORBERS OR FORKS. FOR A CLEAN WORKBENCH AND GOOD BLEEDING RESULTS!
For adjusting the spring preload on WP struts with the plastic preload ring (or our aluminum preload ring). Only for WP shocks with the 50 mm housing. Not suitable for Xplor shocks FIT FOR WP shocks UP TO YEAR 2015 !
- FITS KTM LINK DAMPER 125CC FROM 2016
VALVE EXTRACTOR
For removing the KYB/SHOWA shock absorber compression stage adjuster (21 mm).
For removing the KYB/SHOWA shock absorber compression stage adjuster (24 mm).
Plug nipple NW5 for filling adapter
Universal tool for filling shock absorbers with Schrader valve and rubber plugs (needle filling)
For filling all shock absorbers with Schrader valve (the most common type).
Filling station for filling WP suspension struts and all others with an ISK screw plug. 7 adapters for different sizes and suspension strut types included.
Tool for removing the compression adjusters on SACHS suspension struts.
TOOL FOR POSITIONING THE SEPARATING PISTON IN THE EXPANSION TANK.
Items 1 - 48 of 48