Tools Suspension (general)

2-in-1 AIR PUMP FOR SUSPENSION AND TIRES (Schrader valve):

1. Precise adjustment of air pressure for air-sprung forks and shock absorbers using a short stroke, high-quality pressure sensor, and digital display

2. Inflating tires or air forks (with Schrader valve) using a detachable second cylinder with a large stroke volume

Tool set for removing O-rings and other seals

K-Tech tools for front forks and shock absorbers are designed to help suspension technicians improve efficiency in their workshops. All tools have been developed based on over twenty years of experience in the suspension industry to enable users to work effectively and safely.

This transparent adapter is designed for use with the K-Tech vacuum machine to visually verify that air has been removed from the system.

-Clean surface

-No sanding block required

-Work faster and more efficiently

-Clean surface

-No sanding block required

-Work faster and more efficiently

The K-Tech Off-Road Fork Work Station was designed for precision, organization, and efficiency, and is the ultimate service companion for suspension specialists and dedicated motorcycle enthusiasts. Designed to securely hold multiple fork components during disassembly and maintenance, this purpose-built work station keeps your workspace organized while allowing oil to drain safely from critical suspension parts.

The workstation was specifically designed for off-road forks to support inner and outer fork tubes, cartridges, shock rods, and shock assemblies during maintenance. Each component can be securely placed in its designated holders while excess fork oil drains away, preventing mess and improving workflow efficiency. Since all parts are stored upright and organized in a single compact station, technicians gain more usable workspace and better visibility, which helps streamline complex suspension maintenance tasks.

• Key Benefits

  • Secure Storage of Components—Safely stores fork tubes, cartridges, piston rods, and damping assemblies during maintenance.
  • Better Organization in the Workshop—Keeps suspension parts organized and easily accessible.
  • Oil Drain Management—Allows fork components to drain naturally while being held in place.
  • Space-saving design—Saves valuable bench space during suspension overhauls.
  • Precision tool for the workshop—Ideal for suspension technicians, racing teams, and ambitious mechanics.

For holding/securing fork tubes

Material: Stainless steel, PVC-coated

REPLACEMENT CANNULA SUITABLE FOR OUR NEEDLE FILLING DEVICES WITH THE FOLLOWING PART NUMBER:
213-900-010
70240
70242

1 set (10 pieces)

Mounting sleeves for installing sealing heads.

5-piece set consisting of (L x D):
12.5 x 10 mm
14 x 12 mm
16 x 12 mm
18 x 12 mm
18 x 16 mm

S-TECH SHOCK ABSORBER FILLING ADAPTER SET

Consists of 16 adapters for connecting a vacuum pump (or bleed bottle) to the most common types of shock absorbers.
See product description -->

GAUGE FOR QUICK AND EASY TRAVEL ADJUSTMENT!

MEASUREMENT POSSIBLE ON THE REAR WHEEL AND FORK
ZERO POINT IS ADJUSTABLE, ELIMINATING THE NEED FOR CALCULATIONS. THE MEASURED VALUE IS DISPLAYED DIRECTLY
FOLDABLE. THUS, COMPACT FOR TRANSPORT
FOR SMALL AND LARGE BIKES

THE ALTERNATIVE TO A VACUUM PUMP:

S-TECH BLEEDING KIT FOR BLEEDING SHOCK ABSORBERS OR FORKS.

CONSISTS OF A BLEEDING BOTTLE AND ADAPTER SET.

FOR A CLEAN WORKBENCH AND GREAT BLEEDING RESULTS!

THE ALTERNATIVE TO A VACUUM PUMP: THE S-TECH BLEEDING BOTTLE FOR BLEEDING SHOCK ABSORBERS OR FORKS. FOR A CLEAN WORKBENCH AND GREAT BLEEDING RESULTS!

CASE FOR TRANSPORTING YOUR CHASSIS

• INTERNAL DIMENSIONS: 117 cm x 30 cm x 12 cm (L x W x H)
• EXTERNAL LENGTH < 120 cm. THIS MEANS IT CAN ALSO BE SHIPPED VIA DHL!
• FITS 2 FORK LEGS AND ONE SHOCK ABSORBER
• INCL. FOAM INSERT (PYRAMID PROFILE)
• 4 fasteners
   

2-in-1 tool:

1. Wrench for opening 24mm hex screws

2. Special wrench for removing bottle caps from cold drinks

*COLOR: RED

For filling forks and dampers with rubber plugs.

TO REMOVE THE PISTON ROD ASSEMBLY
SIMPLE FUNCTIONAL TEST OF A SHOCK ABSORBER (QUALITATIVE TEST OF DAMPING RESISTANCE)
TESTING THE DAMPING LEVEL OF THE SHOCK ABSORBER
HEIGHT-ADJUSTABLE
SUITABLE FOR ALL COMMON SHOCK ABSORBERS

•Safe installation and removal of the upper spherical shock absorber mount

•Reversible puller cap for maximum compatibility

•Fits many reservoir and compression adjuster variants

•Suitable for bearings with a 24 mm outer diameter

•Sturdy brass spacer to protect components

•Precise, durable S-TECH quality

•Ideal for maintenance, service, and racing

Holder for storing the shim stacks during suspension service

NW5 Plug Nipple for Filling Adapter

Universal tool for filling shock absorbers with
Schrader valves and
rubber plugs (needle filling)

VENTILATOR

Compatible with: Ducati, Suzuki, Honda, Kawasaki, Yamaha

From: 125 cc-

Compatible with: KTM, Husqvarna, GasGas, Beta, Triumph

From: 125 cc -