Tools Suspension (general)

REPLACEMENT CANNULA SUITABLE FOR OUR NEEDLE FILLING DEVICES WITH THE FOLLOWING PART NUMBER:
213-900-010
70240
70242

1 set (10 pieces)

-Clean surface

-No sanding block required

-Work faster and more efficiently

-Clean surface

-No sanding block required

-Work faster and more efficiently

One size fits all

MotionPro Seal Puller™ – gentle, precise removal of seals without damage, perfect for maintenance and repair.

Mounting sleeves for installing sealing heads.

5-piece set consisting of (L x D):
12.5 x 10 mm
14 x 12 mm
16 x 12 mm
18 x 12 mm
18 x 16 mm

For filling all shock absorbers with Schrader valves (the most common type).

NW5 Plug Nipple for Filling Adapter

For filling KYB KIT shock absorbers and PSF forks.

For holding/securing fork tubes

Material: Stainless steel, PVC-coated

2-in-1 AIR PUMP FOR SUSPENSION AND TIRES (Schrader valve):

1. Precise adjustment of air pressure for air-sprung forks and shock absorbers using a short stroke, high-quality pressure sensor, and digital display

2. Inflating tires or air forks (with Schrader valve) using a detachable second cylinder with a large stroke volume

THE ALTERNATIVE TO A VACUUM PUMP: THE S-TECH BLEEDING BOTTLE FOR BLEEDING SHOCK ABSORBERS OR FORKS. FOR A CLEAN WORKBENCH AND GREAT BLEEDING RESULTS!

2-in-1 tool:

1. Wrench for opening 24mm hex screws

2. Special wrench for removing bottle caps from cold drinks

*COLOR: RED

For filling forks and dampers with rubber plugs.

GAUGE FOR QUICK AND EASY TRAVEL ADJUSTMENT!

MEASUREMENT POSSIBLE ON THE REAR WHEEL AND FORK
ZERO POINT IS ADJUSTABLE, ELIMINATING THE NEED FOR CALCULATIONS. THE MEASURED VALUE IS DISPLAYED DIRECTLY
FOLDABLE. THUS, COMPACT FOR TRANSPORT
FOR SMALL AND LARGE BIKES

S-TECH SHOCK ABSORBER FILLING ADAPTER SET

Consists of 16 adapters for connecting a vacuum pump (or bleed bottle) to the most common types of shock absorbers.
See product description -->