Tools Fork
For filling forks and dampers with rubber plugs.
Tool for opening WP43 XACT PRO forks
Tool for opening the plastic fork cover
Tool for opening the plastic fork cover
Tool for opening the plastic fork cover
Tool for opening the plastic fork cover
Tool for opening the plastic fork cover
Tool for opening the plastic fork cover
Tool for opening the plastic fork cover
Tool for opening the plastic fork cover
Tool for opening the plastic fork cover
Tool for opening the plastic fork cover
-Clean surface
-No sanding block required
-Work faster and more efficiently
- For positioning the Delta shims on the WP rebound piston
- Suitable for Ø20 Delta shims and 23mm pistons
- Quick and easy to use
- Shims can no longer twist
- For holding the adjustment tabs during disassembly and assembly
- Suitable for forks and shock absorbers
- Oversized design, so it also works with standard aftermarket adjusters
Quick and easy removal of the fork dust caps.
S-TECH TOOL FOR REMOVING THE FORK CAP FROM THE PISTON ROD.
- FOR WP XPLOR FORKS WITH EXTERNAL SPRING PRELOAD
Removal lever for removing O-rings from fork tubes
Wrench for opening the SHOWA BPF fork
- Wrench size 45 mm, 8-sided
- Aluminum, CNC-machined, red anodized
-Clean surface
-No sanding block required
-Work faster and more efficiently
Wrench for opening the AER35 WP fork (2021 and later).
- Wrench size 39 mm, hex
- Aluminum, CNC-machined, red anodized
For holding/securing fork tubes
Material: Stainless steel, PVC-coated
Special wrench for the 48mm cone valve seat. Open design: Can also be used with the fork installed.
COLOR: RED
Wrench for adjusting the spring preload on WP Cone Valve / Xact-Pro forks; the wrench is also required for servicing the cartridge.
- 35 mm socket, t=4 mm
TOOL FOR ADJUSTING THE FORK'S SPRING RATE/AIR CHAMBER
MORE PROGRESSION AND IMPACT RESISTANCE THROUGH THE ADDITION OF FORK OIL
PRECISE DOSING VIA SCALE AND VOLUME LOCK
ADJUST THE SPRING RATE DIRECTLY ON THE TRACK
NO NEED TO REMOVE THE FORK
A MUST-HAVE FOR EVERY OFF-ROAD RIDER’S TOOLBOX
Wrench for opening ZF/Sachs forks with 50mm fork caps.
- Spindle holder (slot for holding the piston rod).
- Wrench size 50 mm, 10-sided
- Aluminum, CNC-machined, red anodized
Adjustable socket wrench with interchangeable pins in various sizes
-3 mm
-4 mm
-5 mm
Socket wrench for securing/opening, e.g., the
- SHOWA compression unit (fork)
- Cartridge tubes
S-TECH TOOL FOR ADJUSTING THE COMPRESSION
- NO NEED TO REMOVE THE HANDLEBAR.
- THE SMALL 25MM DIAMETER ALLOWS FOR USE EVEN ON HARD-TO-REACH ADJUSTERS.
Tool set for removing O-rings and other seals
Adapter insert for opening the compression unit of the WP Conve Valve / Pro Components fork
REPLACEMENT CANNULA SUITABLE FOR OUR NEEDLE FILLING DEVICES WITH THE FOLLOWING PART NUMBER:
213-900-010
70240
70242
1 set (10 pieces)
S-TECH TOOL FOR ADJUSTING THE COMPRESSION
-NO NEED TO REMOVE THE HANDLEBAR
-WITH GUIDE
Fits all KYB CC forks.
Universal adapter with three wrench sizes for suspension workshops. The 22mm side has a hole and is therefore suitable, for example, as an adapter insert for opening the SHOWA SFF-AIR fork on the CRF 250 (screw connection with valve).
Wrench sizes:
19 mm
22 mm
24 mm
Tool for changing fork springs (WP35).
KTM SX50 (2012 and later)
KTM SX65 (2012 and later)
Adapter insert for opening the compression unit of the SACHS fork (closed cartridge)
SW: 38/24
Adapter insert for opening the compression damping unit of the WP Closed Cartridge fork
or the damping side of the WP AER fork.
- Wrench size: 17 / 19 mm hex
- WITH HOLLOW BORE - ALLOWS DISASSEMBLY EVEN WITH THE PISTON ROD INSTALLED
- SUITABLE FOR ALL CARTRIDGE HEADS WITH 17MM OR 19MM INTERNAL HEX
Adapter insert for opening the compression stage unit of the:
SHOWA SFF-AIR fork
all SHOWA closed-cartridge forks
all KYB closed-cartridge forks
as well as
the spring-side cap of the SHOWA SFF fork.
Dimensions: 36 / 19
Tool for removing and holding the fork piston rod
-> for bleeding the fork
-> for removing the piston rod to install the threaded fitting
-> 4 thread sizes integrated, allowing it to accommodate the most common piston rods.
-> Extra-long version (L=300 mm)
4 thread sizes:
- M12 x 1.25
- M12 x 1.0
- M10 x 1.25
- M10 x 1.0
Plate for securing the fork piston rod
allows the piston rod screw connection to be loosened
Combination holder (fits Ø10, Ø12, Ø12.5, Ø14)
Aluminum T6061 - CNC-machined, anodized
Plastic mounting sleeves for installing fork seals.
8-piece set consisting of:
36 MM
41 mm
43 mm
45 mm
46 mm
47 mm
48 mm
49 MM
2-in-1 AIR PUMP FOR SUSPENSION AND TIRES (Schrader valve):
1. Precise adjustment of air pressure for air-sprung forks and shock absorbers using a short stroke, high-quality pressure sensor, and digital display
2. Inflating tires or air forks (with Schrader valve) using a detachable second cylinder with a large stroke volume
Wrench for opening Kayaba forks with a 49mm SW fork cap.
- Spindle holder (slot for holding the piston rod).
- Wrench size 49 mm, 8-sided
- Aluminum, CNC-machined, red anodized
Key for opening Showa forks.
- Includes spindle holder (slot for holding the piston rod)
- Wrench size 50 mm, 8-sided
- Aluminum, CNC-machined, red anodized
Comparable OEM reference: 07WMA-KZ30100
Key for opening the AER35 WP fork (up to model year 2020).
- Includes spindle holder (slot for holding the piston rod).
- Wrench size 40 mm, hex
- Aluminum, CNC-machined, red anodized
Key for opening the AER43 WP fork
- Includes spindle holder (slot for holding the piston rod)
- Wrench size 45 mm, hex
- Aluminum, CNC-machined, red anodized
Tools Fork: engineered for motocross and enduro riders. Strong materials, precise fitment and reliable performance.