TOOLS FORK
Items 1 - 50 of 55
KYB-Werkzeug zur Montage von Kolbenbändern
Größe: 25mm
KYB-Werkzeug zur Montage von Kolbenbändern
Größe: 25mm
In stock
Key for opening the AER35 WP fork (from 2021).
- Width across flats 39mm
- hexagonal
- Aluminum
Color: red
In stock
High-quality driver for fitting radial shaft seals.
Sizes:
- 35 mm
- 36 mm
- 37 mm
- 41 mm
- 43 mm
- 45 mm
- 46 mm
- 46/47 mm
- 47 mm
- 48 mm
- 49 mm
- 50 mm
KYB-Werkzeug PSF-1 Cartridge
In stock
TOOL FOR DISMANTLING K-TECH KITS IDS/RDS/DDS/KTR-3
In stock
Universal adapter with three wrench sizes for the chassis workshop. The 22 mm side has a hole and is therefore suitable, for example, as an adapter insert for opening the SHOWA SFF-AIR fork of the CRF 250 (screw connection with valve). wrench sizes: 19 mm 22 mm 24 mm
In stock
Tool for changing the fork springs (WP35) KTM SX50 (from 2012) KTM SX65 (from 2012)
In stock
Adapter insert for opening the compression unit of the SACHS fork (Closed Cartridge) SW: 38/24
In stock
Adapter insert for opening the compression unit of the WP Closed Cartridge fork or the damping side of the WP AER FORK .
In stock
Adapter insert for opening the compression unit of the WP Conve Valve / Pro Components fork
In stock
- WRENCH SIZE: 17 / 19 MM HEXAGON - WITH HOLLOW BORE - ALLOWS DISASSEMBLY EVEN WITH PISTON ROD INSTALLED - SUITABLE FOR ALL CARTRIDGE HEADS WITH 17MM OR 19MM HEXAGON SOCKET
In stock
Adapter insert for opening the compression unit of the: SHOWA SFF-AIR fork all SHOWA Closed Cartridge forks all KYB Closed Cartridge forks and the cover of the spring side of the SHOWA SFF fork Dimensions: 36 / 19
In stock
In stock
Tool set for removing O-rings and other seals
In stock
REPLACEMENT CHANNELS SUITABLE FOR OUR NEEDLE FILLING DEVICES WITH ARTICLE NUMBER: 213-900-010 70240 1 set (10 pieces)
In stock
For holding/fastening fork tubes Material: Stainless steel (rustproof), PVC coated
S-TECH TOOL FOR OPENING OHLIN FORKS Bolt circle diameter: 39 mm Pin diameter: 3.50 mm
In stock
Tool for pulling out and holding the fork piston rod -> for bleeding the fork -> for pulling out the piston rod to fit the screw connection -> 4 thread sizes integrated, allowing the most common piston rods to be accommodated -> extra long version (L=300 mm) 4 thread sizes: - M12 x 1.25 - M12 x 1.0 - M10 x 1.25 - M10 x 1.0
Tool for pulling out and holding the fork piston rod -> for bleeding the fork -> for pulling out the piston rod to fit the screw connection Thread sizes: M13 x 1.0
Plastic mounting sleeves for mounting fork seal rings. 8-piece set consisting of : 36 MM 41 MM 43 MM 45 MM 46 MM 47 MM 48 MM 49 MM
TOOL FOR OPENING ÖHLINS FORKS No. of pins: 8 pieces Bolt circle diameter: 42 mm Pin diameter: 2.50 mm
In stock
For quick and precise adjustment of the oil level or air chamber
In stock
Plate for holding the fork piston rod enables the screw connection of the piston rod to be loosened Combi holder (suitable for Ø10, Ø12 , Ø12.5 , Ø14 ) Alu T6061 - CNC machined, anodized
In stock
2-in-1 air pump for bikes and tires (Schrader valve):
1. Precise adjustment of the air pressure for air-sprung forks and shock absorbers using a small stroke and high-quality measuring sensor and digital display
2. Inflation of tires or air forks (with Schrader valve) by means of an unlockable second cylinder with large stroke volume
Special wrench for the 48mm Cone Valve seal carrier. Open version: Can also be used with fork installed COLOR: RED
In stock
KEY FOR ADJUSTING THE SPRING PRELOAD OF WP CONE VALVE / XACT-PRO FORKS THE KEY IS ALSO REQUIRED FOR SERVICING THE CARDRIGE SW 35MM T=4MM
In stock
TOOL FOR ADJUSTING THE SPRING CHARACTERISTIC/AIR CHAMBER OF THE FORK MORE PROGRESSION AND PUNCTURE RESISTANCE BY ADDING FORK OIL EXACT DOSAGE BY MEANS OF SCALING AND VOLUME LOCK ADJUSTMENT OF THE SPRING CHARACTERISTIC DIRECTLY ON THE TRACK NO REMOVAL OF THE FORK NECESSARY A MUST FOR THE TOOLBOX OF EVERY OFFROAD DRIVER
In stock
2 in 1 tool: 1. wrench for opening Kayaba forks with 49mm fork cap 2. spindle holder (slot for holding the piston rod) - wrench size 49mm - 8-edge - incl. spindle holder *COLOUR: RED
In stock
2 in 1 tool: 1. wrench for opening ZF/Sachs forks with 50mm fork cap 2. spindle holder (slot for holding the piston rod) - wrench size 50mm - 10-edge - incl. spindle holder *COLOUR: RED
In stock
2 in 1 tool: 1. wrench for opening Showa forks. 2. spindle holder (slot for holding the piston rod) - wrench width 50mm - 8-edge - incl. spindle holder *COLOUR: RED
In stock
2 in 1 tool:
1. Key for opening the AER35 WP fork (up to year 2020).
2. Spindle holder (slot for holding the piston rod).
- Width across flats 40mm
- hexagonal
- Incl. spindle holder
- made of aluminum
Color: red
In stock
2 in 1 tool: 1. wrench for opening the AER43 WP fork. 2. spindle holder (slot for holding the piston rod) - wrench size 45mm - hexagonal - incl. spindle holder *COLOUR: RED
In stock
2 in 1 tool: 1. key for opening the WP fork. 2. spindle holder (slot for holding the piston rod) - Width across flats 50 mm - hexagonal - Incl. spindle holder Suitable for all WP forks: - Closed Cartridge - Open Cartridge - 4CS - Xplor *COLOUR: RED
In stock
TOOL FOR ADJUSTING THE OIL LEVEL ON FORKS - 200 ML LARGE VOLUME ->> ADJUST OIL LEVEL IN JUST ONE OPERATION, EVEN WITH LARGE VOLUME FORKS - SUCTION HEIGHT ADJUSTABLE QUICKLY AND EASILY BY MEANS OF SCALING AND ADJUSTABLE SLIDER
In stock
Adjustable face wrench with interchangeable pins in various sizes -3mm -4mm -5mm
In stock
S-TECH TOOL FOR ADJUSTING THE PRESSURE LEVEL - NO DISASSEMBLY OF THE STEERING BAR NECESSARY - WITH GUIDANCE Suitable for all KAYABA CC forks.
S-TECH TOOL FOR DETACHING THE FORK COVER FROM THE PISTON ROD - FOR WP XPLOR FORKS WITH EXTERNAL SPRING PRELOAD
In stock
S-TECH TOOL FOR ADJUSTING THE COMPRESSION DAMPING - NO DISASSEMBLY OF THE HANDLEBARS NECESSARY - THE SMALL 25MM DIAMETER ALLOWS THE USE EVEN ON INACCESSIBLE ADJUSTERS.
In stock
S-TECH TOOL FOR RELIEVING THE FORK SPRINGS - MAKES THE REMOVAL OF THE FORK SPRINGS ON ROAD VEHICLES EASIER/ SIMPLIFIED !
In stock
VALVE EXTRACTOR
In stock
Spigot wrench for holding/opening e.g. the - SHOWA compression unit (fork) - Cartridge tubes
In stock
Face wrench for fork covers: - WP 4CS - WP Open Cartridge Bolt circle diameter: 39 mm
In stock
Universal tool for filling shock absorbers with Schrader valve and rubber plugs (needle filling)
Items 1 - 50 of 55