REDUCING COVER-15-22-10 COVER FOR REDUCING THE SPRING WAY 15x22x10 mm picture 1

Sleeves for Reducing Spring Travel 15x22x10 mm

SKU: RH-15-22-10
Category: Lowering / Spacers

SLEEVES FOR REDUCING SPRING TRAVEL ON FORKS (E.G., WHEN LOWERING THE VEHICLE)

The sleeves are simply slid onto the piston rod, thereby limiting the fork’s travel—for example, to lower the vehicle’s ride height.

Compatible with:
12 / 12.5 mm piston rods (WP/SHOWA/KYB)
14 mm piston rods (WP)

Execution: 13 x 20 x 5 mm (di x da x t)

13 x 20 x 10 mm (di x da x t)

15 x 22 x 10 mm (di x da x t)

15 x 22 x 5 mm (di x da x t)

4,60 €

incl. 19% VAT , plus

Available immediately
Delivery time: 1 - 4 Workdays (DE - int. shipments may differ)

Description

Are you planning to lower your vehicle? To do this, simply install the S-TECH reducer sleeves onto the fork’s piston rod. For example, if you want to reduce the fork’s travel by 35 mm, simply place the appropriate number of sleeves (in this case: 3 x 10 mm plus 1 x 5 mm) on the piston rod inside the cartridge tube—that is, between the pistons or the rebound spring (if present) and the cartridge head. This reduces the fork’s travel by the same amount as the stack of spacers. So if you install a total of 35 mm of spacers, the travel is reduced by 35 mm. This modification is simple, quick, and fully reversible!

Available sizes:

13 x 20 (inner x outer) -> e.g., for all forks with 12 or 12.5 mm piston rods
15 x 22 (inner x outer) -> e.g., for WP Open-Cartridge forks with 14 mm piston rods
Both sizes are available in 5 mm and 10 mm thicknesses

Item information	Value
Item weight:	0,01 kg
Content:	1,00 Stück

Product safety information

Manufacturer information:

SKF Industrie S.p.A.
Via Pinerolo 44
Torino
Airasca, Italien, 10060
info@skf-spa.it