REDUCING HOLES_FORK HOLES FOR REDUCING THE SPRING TRAVEL (FORK) Fig. 1

SLEEVES TO REDUCE THE SPRING TRAVEL (FORK)

SKU: REDUZIERHUELSEN_GABEL
Category: LOWERING / SPACER

SLEEVES FOR REDUCING THE SPRING TRAVEL OF FORKS (E.g.: FOR LOWERING) The sleeves are simply pushed onto the piston rod and thus limit the stroke of the fork, for example for lowering the vehicle. Suitable for: 12 / 12.5 mm piston rods (WP/SHOWA/KYB) 14 mm piston rods (WP)

Execution: 13 x 20 x 5 mm (di x da x t)

13 x 20 x 10 mm (di x da x t)

15 x 22 x 10 mm (di x da x t)

15 x 22 x 5 mm (di x da x t)

3,90 €

incl. 19% VAT , plus

Available immediately

This item has variations. Please select the requested variation.

Description

Are you planning to lower a vehicle? Simply install the S-TECH reduction sleeves on the piston rod of the fork. For example, if you want to reduce the stroke of the fork by 35 mm, simply place the corresponding number of sleeves (in this case: 3x 10 mm plus 1x 5 mm) on the piston rod inside the cartridge tube, i.e. between the piston or the rebound spring (if present) and the cartridge head. This reduces the stroke of the fork by the same amount as the sleeve stack. So if you install a total of 35 mm of sleeves, the stroke is shortened by 35 mm. This conversion is simple, quick and completely removable!

Available sizes:

13 x 20 (di x Da) -> e.g. for all forks with 12 or 12.5 mm piston rods
15 x 22 (di x Da) -> e.g. for WP Open-Cartridge forks with 14 mm piston rods
both sizes in 5 mm thickness and 10 mm thickness

Product safety information

Manufacturer information:

S-TECH RACING GMBH
Am Entenpfuhl 22A
Rheinlandpfalz
Göllheim, Germany, 67307
info@s-tech-racing.de
www-s.tech-racing.de

Item weight:	0,01 kg