REDUCING COVER-15-22-5 COVER FOR REDUCING THE SPRING WAY 15x22x5 mm picture 1

SLEEVES FOR REDUCING THE SPRING WAY 15x22x5 mm

SKU: REDUZIERHUELSE-15-22-5
Category: LOWERING / SPACER

SLEEVES FOR REDUCING THE SPRING TRAVEL OF FORKS (E.g.: FOR LOWERING) The sleeves are simply pushed onto the piston rod and thus limit the stroke of the fork, for example for lowering the vehicle. Suitable for: 12 / 12.5 mm piston rods (WP/SHOWA/KYB) 14 mm piston rods (WP)

Execution: 13 x 20 x 5 mm (di x da x t)

13 x 20 x 10 mm (di x da x t)

15 x 22 x 10 mm (di x da x t)

15 x 22 x 5 mm (di x da x t)

3,90 €

incl. 19% VAT , plus

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

pcs

Description

Are you planning to lower a vehicle? Simply install the S-TECH reduction sleeves on the piston rod of the fork. For example, if you want to reduce the stroke of the fork by 35 mm, simply place the corresponding number of sleeves (in this case: 3x 10 mm plus 1x 5 mm) on the piston rod inside the cartridge tube, i.e. between the piston or the rebound spring (if present) and the cartridge head. This reduces the stroke of the fork by the same amount as the sleeve stack. So if you install a total of 35 mm of sleeves, the stroke is shortened by 35 mm. This conversion is simple, quick and completely removable!

Available sizes: