GBO-50-20-1.0 PREMIUM-GLEITBUCHSEN 50,7x20x1.0 Bild 1

ATHENA PREMIUM SLIDES 50.7x20x1.0

SKU: SKTE50M
Category: SLIDING BUSHES OUTER/INNER TUBE

OUTSIDE COATING Nominal dimensions: 50.7 x 20 x1.0 mm (outer Ø x height x wall thickness) SUITABLE FOR: MARZOCCHI 50

10,80 €

incl. 19% VAT , plus

Currently out of stock
Delivery time: 8 - 9 Workdays (DE - int. shipments may differ)

pcs

Please note the permissible order quantity of 1 pcs.

Description
suitable for

S-TECH PREMIUM FORK BUSH INGS

S-TECH PREMIUM bushings have a high-quality sliding layer compound with excellent self-lubricating properties and high wear resistance at the same time. Precise manufacturing ensures tight tolerances and high dimensional accuracy. These bushings are recommended for all those who have high demands on the response behavior and performance of their fork.

Features:

very good sliding properties
high proportion of self-lubricating components
low friction values, very low stick-slip effect, very good response behavior
lower sensitivity to dirt ingress (contaminated oil) -> therefore good response behavior for a longer period of time

Scope of delivery:

1 set (2 pieces)

S-TECH workshop tip:

Clean the fork very thoroughly by disassembling the fork completely and rinsing all parts thoroughly. We recommend using MAXIMA SUSPENSION CLEAN for cleaning
Dry the parts thoroughly. There must be no solvent or cleaning agent residues in the fork components.
use high-quality fork oil as this is also very important for the running properties. We recommend the fork oil RACING FORK FLUID from MAXIMA.
use the S-TECH PREMIUM bushings together with the SKF Simmerring kits, which also optimize the friction coefficient, to achieve the best possible performance
only use high-quality silicone-based grease (e.g. our Turmsilon) to lubricate the radial shaft seal. Do not use lubricating greases (e.g. bearing grease)! If no high-quality silicone grease is available, only immerse the oil seals in the fork oil for lubrication before fitting.
If possible, also use additives to improve the gliding properties, e.g. HKS fork glide improver. Before fitting, apply a small amount of HKS to the dust cap (coat the sliding surface), to the seal ring (apply a thin layer to the grease pad) and to the bushings. Also add 5-10 ml to the fork oil, mix it and pour it into the fork (for closed cartridges only into the outer chamber).
Applya high-quality lubricant such as Fin Lube TF Spray to the inner tubes (chrome tubes)before assembly and polish it in.
If possible, polish the inner tubes thoroughly using a polishing paste and a fine abrasive fleece. Clamping in a lathe and polishing using the cross-grinding method is suitable for this.
The radial play on the bushing with the inner coating should not be greater than 0.15 mm. If this is greater, adjustment using a feeler gauge tape is recommended.

FORKTYPE:	MARZOCCHI 50
QUALITY:	PREMIUM SOCKETS
BUSHING PLATING:	OUTSIDE
Item weight:	0,05 kg

MV_AGUSTA BRUTALE_1078RR 2007-2009
MV_AGUSTA BRUTALE_1090RR 2010-2010
MV_AGUSTA BRUTALE_750_AMERICA 2005-2005
MV_AGUSTA BRUTALE_750S 2005-2005
MV_AGUSTA BRUTALE_910R 2006-2007
MV_AGUSTA BRUTALE_910S 2006-2007
MV_AGUSTA BRUTALE_989R 2008-2