OTHER SHOCK ABSORBER PARTS
Items 1 - 33 of 33
The items on this page are not affected by the vehicle's filter settings.
In stock
Special filling screw for WP shock absorbers as a replacement for the WP ISK screw. Needle filling -> no WP filling device required.
New
Shock absorber end cap
oD= 51 mm
id=19,5
Height= 10 mm
New
Shock absorber end cap
oD= 53 mm
id=17,5
Height= 10 mm
S-TECH spring preload ring made of anodized aluminium, color: red
WP Drawbar needle
In stock
Complete set: - rebound screw - O-ring - spring - balls - guide
In stock
ORIGINAL SHOWA PRE-TENSION RINGS FIT FOR ALL SHOWA SHOCK ABSORBERS WITH 50MM PISTONS (=> THREAD M60x1.5) 1 PIECE SPRING RECOVERY RING 1 PIECE CONTER NUT
In stock
GAS VALVE FOR FILLING WITHOUT WP NITROGEN STATION WP D58MM DIAMETER: 58MM
In stock
GAS VALVE FOR FILLING WITHOUT WP NITROGEN STATION WP LINK FROM 2016 DIAMETER: 64MM
In stock
Rubber stoppers for needle filling. 100 mm pieces are supplied. This results in approx. 20 rubber stoppers. Diameter: D= 5.70 mm
In stock
For WP XACT5448 damper KTM SX/SX-F , HSQ TC/FC from 23
In stock
For WP XACT5448 damper KTM SX/SX-F , HSQ TC/FC from 23
In stock
Lock nut for WP piston rods (M18x1)
Lock nut for WP piston rods (M18x1)
In stock
Self-locking nut for KYB piston rods (M12x1.5)
In stock
Self-locking nut for Showa piston rods (M12x1.25)
Nut for SHOWA piston rods (M16x1.25) Design: flat (6.90mm) Original SHOWA spare part Not self-locking
In stock
Suitable for all WP XACT5448 WP XPLOR 24> shock absorbers
In stock
For WP XACT5448 damper KTM SX/SX-F , HSQ TC/FC from 23
In stock
S-TECH spring preload ring made of anodized aluminium, color: red
In stock
SHIM STACK SPACER ID Spacer: 16MM Spacer thickness: 3.0MM
In stock
SUITABLE FOR MOST SHOCK ABSORBERS OR ALSO FOR KYB AIR FORKS Incl. O-ring
In stock
Length: 215mm HONDA CRF250 2018-2020 HONDA CRF450 2017-2020 Without O-ring
In stock
Special filling screw for WP shock absorbers as a replacement for the WP ISK screw. Needle filling -> no WP filling device required.
In stock
Logo on black foil.
In stock
Logo on transparent film.
In stock
Incl. O-ring
In stock
Shock absorber bearing GE12UK Radial spherical plain bearing for BUD shock absorber type: GE12UK 12 x 22 mm
In stock
Shock absorber bearing GE15UK Radial spherical plain bearing for BUD shock absorber type: GE15UK, 15 x 26 mm
In stock
VALVE CAP (SCHRADER) FOR FORK OR SHOCK ABSORBER VALVES. STEEL, SHORT (6.7MM), NICKEL-PLATED WITH GASKET 1 SET (5 PIECES)
In stock
FITTING SCREW STICKSTOFF CONTAINER. FITS ALL WP-ADAPTERS. MATERIAL: TITANIUM TYPE: M5 x 6MM, ISK4 INCL. O-RING
Items 1 - 33 of 33